IS Shield

From ITEAD Wiki
Revision as of 03:35, 26 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

IS Shield.jpg

IS Shield with 2 channels mechanical relays and 2 channels MOS switch, providing an easy way for applications of voltage controlling from low to high.

The 3Pins breakout make it easy to build a project or prototyping quickly, by using many existing sensor modules (Electronic Brick). And there are some wireless interface breakout on board, you can use it to connect with many wireless module.

Features

  • 2 mechanical relays with photo-coupled circuit
  • 2 MOS switch with internal power supply
  • Xbee, nRF24l02, RF315/433M module wireless interface
  • Arduino AD pins 3 PINs interface breakout for Sensor module (Electronic Brick)
  • Equipped with screw holes for easy installation
  • Native Arduino/Iteaduino compatibility

Specifications

PCB size 67.3mm X 59.1mm X 1.6mm
Indicators PWR, status LED
Power supply 9~20V, compatible with Arduino
Communication Protocol XBee, nRF24L01+,UART, IIC, 315/433 RF module
RoSH Yes

Electrical Characteristics

Specification Min Type Max Unit
Power Voltage(Vlogic) 4.5 5 5.5 VDC
Power Voltage(Vsupply) 9 - 20 VDC
Input Voltage VH: 4.5 5 5.5 V
Input Voltage VL: -0.3 0 0.5 V
Current Consumption - 400 mA
  • IS shield just can work with Extenal Power supply or with the Arduino that using Extenal Powe

supply, and it cannot work with Arduino which using USB 5V power supply.

Hardware

Installation

Download

Useful Links