Difference between revisions of "IR Shield"

From ITEAD Wiki
Jump to: navigation, search
m (Instruction)
m
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Overview==
+
<languages/>
 +
<translate>
 +
==Overview== <!--T:1-->
 
[[File:IM140715001_4.jpg|thumb|400px|right]]
 
[[File:IM140715001_4.jpg|thumb|400px|right]]
 
IR [[Shield]] is designed for Arduino, which is equipped with infrared receiving and dispatching module, nRF24L01 interface, Xbee interface, Micro SD slot and temperature and humidity sensor. With this IR [[shield]], you can intelligentize your home by making a DIY monitor for indoor temperature and humidity or a controller for IR home appliances such as air-condition and television.
 
IR [[Shield]] is designed for Arduino, which is equipped with infrared receiving and dispatching module, nRF24L01 interface, Xbee interface, Micro SD slot and temperature and humidity sensor. With this IR [[shield]], you can intelligentize your home by making a DIY monitor for indoor temperature and humidity or a controller for IR home appliances such as air-condition and television.
  
Go shopping
+
<!--T:2-->
 +
Go shopping [http://imall.itead.cc/im140715001.html IR Shield(SKU:IM140715001)]
  
==Features==
+
==Features== <!--T:3-->
 
*Compatible for 5/3.3V main board
 
*Compatible for 5/3.3V main board
 
*Micro SD card slot
 
*Micro SD card slot
 
*Xbee interface
 
*Xbee interface
  
==Specification==
+
==Specification== <!--T:4-->
 
{| border="1"
 
{| border="1"
 
| PCB size||55.88mm X 68.58mm X 1.6mm
 
| PCB size||55.88mm X 68.58mm X 1.6mm
Line 22: Line 25:
 
|}
 
|}
  
==Electrical Characteristics==
+
==Electrical Characteristics== <!--T:5-->
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 42: Line 45:
 
|}
 
|}
  
==Hardware==
+
==Hardware== <!--T:6-->
 
[[File:IM140715001pic1.jpg|500px]]
 
[[File:IM140715001pic1.jpg|500px]]
 
[[File:IM140715001pic2.jpg|500px]]
 
[[File:IM140715001pic2.jpg|500px]]
 
[[File:IM140715001pic3.jpg|500px]]
 
[[File:IM140715001pic3.jpg|500px]]
  
==Pin Map==
+
==Pin Map== <!--T:7-->
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
Line 103: Line 106:
 
*Switch: Set the switch level according to Arduino main board. When the mainboard is set in 5V, you should turn the switch to 5V; when in 3.3V, you should turn to 3.3V.
 
*Switch: Set the switch level according to Arduino main board. When the mainboard is set in 5V, you should turn the switch to 5V; when in 3.3V, you should turn to 3.3V.
  
==Instruction==
+
==Instruction== <!--T:8-->
 
Please refer to our blogs:
 
Please refer to our blogs:
  
 +
<!--T:9-->
 
http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/
 
http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/
  
==Download==
+
==Download== <!--T:10-->
 
*Schematic--[[:File:IM140715001-IR Shield-schematic.pdf]]
 
*Schematic--[[:File:IM140715001-IR Shield-schematic.pdf]]
 
*IR Receiver Datasheet--[[:File:IM140715001-HS0038B.pdf]]
 
*IR Receiver Datasheet--[[:File:IM140715001-HS0038B.pdf]]
Line 114: Line 118:
 
*Temperature & Humidity sensor demo--[[:File:Sht10.zip]]
 
*Temperature & Humidity sensor demo--[[:File:Sht10.zip]]
  
==Useful Link==
+
==Useful Link== <!--T:11-->
 
http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/
 
http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/
 +
</translate>

Latest revision as of 01:45, 4 August 2015

Other languages:
English 100% • ‎中文(中国大陆)‎ 92%

Overview

IM140715001 4.jpg

IR Shield is designed for Arduino, which is equipped with infrared receiving and dispatching module, nRF24L01 interface, Xbee interface, Micro SD slot and temperature and humidity sensor. With this IR shield, you can intelligentize your home by making a DIY monitor for indoor temperature and humidity or a controller for IR home appliances such as air-condition and television.

Go shopping IR Shield(SKU:IM140715001)

Features

  • Compatible for 5/3.3V main board
  • Micro SD card slot
  • Xbee interface

Specification

PCB size 55.88mm X 68.58mm X 1.6mm
Power supply 5V DC
Indicators PWR,LED1,LED2
Communication Protocol UART,IIC,SPI

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 4.5 5 5.5 VDC
Input voltage VinH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input voltage VinH (Target Voltage = 5V) 4.5 5 5.5 V
Input voltage VinL -0.3 0 0.5 V
Current Consumption - 40 - mA

Hardware

IM140715001pic1.jpg IM140715001pic2.jpg IM140715001pic3.jpg

Pin Map

Arduino Pin Description
D0 XBEE_TX
D1 XBEE_RX
D2 nRF24L01_IRQ & STD Button
D3 IR_TX*
D4 SD_CS
D5 IR_RX*
D6 LED1*
D7 LED2*
D8 -
D9 nRF24L01_CE
D10 nRF24L01_CS
D11 MOSI
D12 MISO
D13 SCK
A0 A0 Button
A1 -
A2 -
A3 -
A4 SHT10_SDA
A5 SHT10_SCL
  • IR_TX: when D3 is set as high level switch, IR Diode will emit signals out. When D3 is set as low level switch, IR Diode won’t work.
  • IR_RX: Use HS0038B as IR receiving module
  • Jumpers:
Jumpers can directly connect to Arduino’s IO. If you don’t need them or their corresponding pins are occupied, you can remove the jumpers.
  • A0: insert a 10K resistance to A0 button
  • LED1: connect to D6 pin. If the output voltage is high, LED1 turns on.
  • LED2: connect to D7 pin. If the output voltage is high, LED1 turns on.
  • Switch: Set the switch level according to Arduino main board. When the mainboard is set in 5V, you should turn the switch to 5V; when in 3.3V, you should turn to 3.3V.

Instruction

Please refer to our blogs:

http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/

Download

Useful Link

http://blog.iteadstudio.com/diy-intelligent-monitor-for-home-temperature-and-humidity/