IComSat

From ITEAD Wiki
Revision as of 01:39, 23 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

IComsat .jpg

IComsat is a GSM/GPRS shield for Arduino and based on the SIM900 Quad-band GSM/GPRS module. It is controlled via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands), and fully compatible with Arduino / Iteaduino and Mega.

Features

  • Quad-Band 850/900/1800/1900MHz
  • GPRS multi-slot calss 10/8
  • GPRS mobile station class B
  • Compliant to GSM phase 2/2+
  • Class 4 (2W@850/900MHz)
  • Class 1 (1W@1800/1900MHz)
  • Control via commands (GSM 07.07, 07.05 and SIMCOM enhanced AT Commands)
  • Short message service
  • Free serial port selection
  • All SIM900 pins breakout
  • RTC supported with Super Cap
  • Power on/off and reset function supported by Arduino interface

Specifications

PCB size 77.2mm X 66.0mm X 1.6mm
Indicators PWR, status LED, net status LED
Power supply 9~20V, compatible with Arduino
Communication Protocol UART
RoSH Yes

Electrical Characteristics

Hardware

Installation

UART Multiplexer (For free UART connection setting)

Com Switch

RI Behavior Output

Indicator LED and Buttons

Software Notes

Download

Useful Links