IBoard

From ITEAD Wiki
Revision as of 02:49, 20 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search

Overview

IBoard3.jpg

Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!

Iboard can be used as an Ethernet, wireless communication project development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.

The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE.

Spec

PCB size 79.2mm X 53.8mm X 1.6mm
Power supply 6-20V DC
Microprocessor Atmega328
Indicators PWR, Tx, Rx, COL, FDX, SPD, LINK
RoHS Yes

Electrical Characteristics

Specification Min. Typical Value Max. Unit
Power Voltage 6 - 23 VDC
Input Voltage VH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input Voltage VL: -0.3 0 0.5 V
Current Consumption - 100 500 mA

Hardware

IBoard1.jpg

Top View Map

Iboard can be used as an Ethernet, wireless communication project development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping.

The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB, power Jack or POE.

Software

Iboard is designed for compatible for SD and Wiznet libraries of Arduino, and all demo codes could be downloaded directly here: http://www.ladyada.net/learn/arduino/ethfiles.html

With embedded bootloader, Iboard is easy to use by Arduino IDE through Foca series. ISP of Atmega328 is broke out for download firmware easily.

Download

Datasheet for iBoard

Demo Code for iBoard

Schematic for iBoard

Fritzing Parts for iBoard

Useful Link

By michu <Make StripInvaders Cheaper: Use An IBoard>

Andy Karpov's GitHub Page <RF24 library that supports nRF24L01 on iBoard>

Andy Karpov's GitHub Page <RF24Network library that supports nRF24L01 on iBoard>

By NI$HANT <IBoard not able to access A6 and A7>

<BTBee Pro Wireless Program Tutorials>

<Fritzing Parts: ITEAD Development Board>