Difference between revisions of "EWeLink Introduction"

From ITEAD Wiki
Jump to: navigation, search
m (Scene and Smart Scene)
m (LAN Control)
 
(152 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
===Overview===
 
===Overview===
  
eWeLink is a smart home control APP that can control all ITEAD home automation devices and cooperated products. The smart home devices connect to home appliances and electronic devices via WiFi, allowing you to remote control through APP eWeLink. With eWeLink, users can control and manage more than hundred smart home devices of 80 brands.  
+
eWeLink is a smart home control APP that can control all ITEAD home automation devices and cooperated products. It allows you to remote control and manage your favorite smart devices of different brands in a single App. The smart home devices connect to home appliances and electronic devices via WiFi, allowing you to remote control through the APP eWeLink. There isn't a limit to the number of devices you can add to eWeLink, although we usually say 150.
  
 
'''eWeLink Basic Functions:'''
 
'''eWeLink Basic Functions:'''
Line 9: Line 9:
 
Countdown/schedule timer
 
Countdown/schedule timer
  
One-key sharing
+
Share control
  
 
Group/scene management
 
Group/scene management
  
Add the smart home devices to eWeLink account, users can control the devices through accessing to Coolkit’s WeChat subscription account or adding widget to mobile desktop later on.
+
Scene/smart scene
  
You can [[download]] iOS version from Apple APP Store, Android version from Google Play. Or you may directly [[download]] from Coolkit by scanning below QR code.
+
By adding the smart home devices to the eWeLink account, users can control the devices by following and accessing to Coolkit's WeChat subscription account, or by adding a widget to mobile desktop later on.
  
[[File:ewelink-download-from-coolkit.png|400px]]
+
Users can [[download]] latest iOS eWeLink from Apple APP Store and Android eWeLink from Google Play. Please scan below QR code. If you are using a lower version, please uninstall and then scan and download the latest version.
  
Following we will introduce how to use eWeLink.
+
[[File:eWeLink.png|400px]]
 +
 
 +
Now we will explain how to use eWeLink.
  
 
===Registration and Log in===
 
===Registration and Log in===
eWeLink supports multiple languages, currently includes simplified Chinese, traditional Chinese, English, Danish, Russian. It will support more languages in the future.
+
eWeLink supports multiple languages. It currently includes simplified Chinese, traditional Chinese, English, Danish, Russian, Italian, Polish, France, Spanish, German, Turkish, Slovakia, Greece, Bulgaria, Czech, Slovenian, Portuguese(Brazil), etc. It will support more languages in the future.
  
 
[[File:ewelink login.jpg|400px]]
 
[[File:ewelink login.jpg|400px]]
  
It supports register by email or mobile phone number. Users from Asian area MUST register by mobile phone number. While users outside Asian area can register by mobile phone number or email address.  
+
It supports registration by email or mobile phone number. We suggest you update your app to the latest version.
 +
<span style="color:#FF0000">  '''Users from Asian countries should register with mobile phone number. While users outside Asian area should register with email address. Turkey users also need to register with phone number.But sometimes the app will judge which server is more stable in your location, then it will auto judge whether to let you connect with Asian servers (register with phone number) or other servers(register with email). '''</span>
 +
 +
 
 +
Select your country/region code, input a valid mobile phone number, then your phone will receive an SMS containing a verification code on the phone number you provided. If you do not receive the SMS, please disable SMS blocking. If registered by email address, you'll also need to select a random country code, you’ll receive an email containing a verification code. Fill in the verification code and password, confirm password and submit. For safety, the password should be no less than 8 characters. <span style="color:#FF0000">If you failed to receive any code, please submit a feedback on the App.</span>
 +
 
 +
One account can only log in to one mobile phone. If you have logged in with phone A, later you log in with phone B, your device will auto-exit from phone A.
 +
 
 +
===Reset Password===
 +
[[File:forget_pwd_1.png|400px]]
 +
 
 +
If you forget your password, please log out, go to the login interface. Click "Forget Password" to reset.
  
Select your country/region code , input a correct mobile phone number, then you phone will receive an SMS containing a verification code. If not receive, please disable SMS blocking. If registered by email address, you’ll receive an email containing a verification code. Fill in the verification code and password, confirm password and submit. For safety, password must be more than 8 characters.
+
[[File:reset_password_1.jpg|400px]]
 +
[[File:reset_password_2.jpg|400px]]
  
One account can only log in to one mobile phone, if you have logged in with phone A, later you log in with phone B, your device will auto-exit from phone A.
+
===WiFi Pairing and Device Addition===
 +
eWeLink obtains device status and controls devices by sending commands through the cloud server. This means all devices must first connect to the WiFi router and connect to our Amazon AWS server. So every new device must be paired with user's home WiFi and added to eWeLink account.
  
===WiFi Pairing and Device Adding===
+
Before adding a device, Android phone must allow WiFi. Please make sure the WiFi your phone connects is the same as the one you select in eWeLink device pairing WiFi option. Please note that all eWeLink products should be paired via the WiFi router, starting from 3.1.0, LAN is not allowed any more.
eWeLink obtains device status and controls devices by sending commands through cloud server. That means all devices must first connect to WiFi router and connect to our Amazon AWS server. So every new device must be paired with your home WiFi and added to eWeLink account.
+
  
Before adding a device, Android phone must open WiFi. Here below is how to pair with WiFi and add a new device:
+
Instructions are given below on how to pair with WiFi and add a new device:
  
 
[[File:ewelink add device (2).jpg|400px]]
 
[[File:ewelink add device (2).jpg|400px]]
  
Step 1. Long press your device WiFi pairing button until it fast blinking.  
+
Step 1. Long press your device WiFi pairing button until it begins fast blinking.  
  
Step 2. For Android, please select the pairing method according to how the LED blink. Click NEXT.
+
Step 2. Open eWeLink. Click "+" to add the device. For Android, please select the pairing icon according to how the LED blinks. Click NEXT.
  
For iOS, please go to phone Setting>WiFi>connect the WiFi begins with ITEAD-*****, enter default password 12345678. Then go back to eWeLink, select the pairing method according to how the LED blink. Tap on NEXT.
+
For iOS, please go to phone Setting>WiFi>connect to the WiFi that begins with ITEAD-*****, enter default password 12345678. Then go back to eWeLink, select the pairing icon (TOUCH or AP) according to how the LED blinks. Tap on NEXT.
  
A reminder here: if the phone asks similar question like "eWeLink wants to locate your position, accept or reject?" Then please always click ACCEPT, or it may cause a failed pairing.
+
[[File:pairing_icons.jpg|600px]]
 +
 
 +
A reminder here: if the phone asks a similar question like "eWeLink wants to locate your position, accept or reject?" Then please always click ACCEPT. Otherwise, it may cause a failed pairing.
  
 
[[File:ewelink pairing.jpg|400px]]
 
[[File:ewelink pairing.jpg|400px]]
  
Step 3. Enter your home WiFi SSID and password. If no password, keep it blank. Now eWeLink only support 2.4G wifi communication protocol, 5G-WiFi-router is not supported. Tap on NEXT.
+
Step 3. Enter your home WiFi SSID and password. You must make sure the WiFi your are entering with is the same with the one your phone connecting. If different, it will cause offline problem. If no password, keep it blank. For the present, eWeLink only supports 2.4G wifi communication protocol. 5G band Wi-Fi network is not supported. Tap on NEXT.
  
 
[[File:ewelink name device.jpg|400px]]
 
[[File:ewelink name device.jpg|400px]]
  
Step 4. eWeLink will auto-search and connect your device. After this process, you can name the device and submit. Completed!
+
Step 4. eWeLink will auto-search and connect to your device. After this process, you can name the device and submit. That's all!
 +
 
 +
<span style="color:#FF0000">After successfully added, make sure you don't change the WiFi the product connects. Once you change the WiFi, you must delete and re-add it to your account via the new WiFi.</span>
  
 
===Device List===
 
===Device List===
 
[[File:ewelink all devices.jpg|400px]]
 
[[File:ewelink all devices.jpg|400px]]
  
After successfully added, all devices will be seen in device list. You can see which devices are online which are not, WiFi signal strength, and whether there is new firmware to update, etc. You can directly turn on/off device by tapping the small switch icon. Besides, you can delete device by tapping on the delete icon. Tap on the clock icon you’ll see all timing schedules.
+
After successfully added, all devices will be seen in the device list. Users can see which devices are online which are not. Users can also see WiFi signal strength, and whether there is new firmware to update, etc. Users can directly turn on/off the device by tapping the small switch icon. Besides, users can delete devices by tapping on the delete icon. Tap on the clock icon to see all timing schedules.
  
 
[[File:ewelink group management.jpg|400px]]
 
[[File:ewelink group management.jpg|400px]]
  
If you have too many devices, you may group them. Tap on the top “All Device” to expand the group information. Click”Manage Group”, you can set up different group for your devices.
+
If you have too many devices, you may group them. Tap on the top "All Device"  option to expand the group information. Click "Manage Group" to set up different group for your devices.
  
 
===Device Details===
 
===Device Details===
Tap on a specified device, you’ll enter into device control interface. Different device will have different functions and layout. Take some devices for example.
+
Tap on a specified device to enter into device control interface. Different devices will have different functions and layout. Take some devices for example.
  
 
[[File:eWeLink Control Interface.jpg|600px]]
 
[[File:eWeLink Control Interface.jpg|600px]]
  
For [[Sonoff TH]], you can see real time temperature and humidity. And supports to set manual/auto control mode. For dimming led, you can adjust light color and brightness. For iFan, you can switch among natural/sleep/normal mode, and in normal mode, you can adjust the wind level from 1-3.
+
For [[Sonoff TH]], users can see real time temperature and humidity. It also provides the capability to set manual/auto control mode. For dimming LED, users can adjust light color and brightness. For iFan, users can adjust among natural/sleep/normal mode, and in normal mode, users can adjust the wind level from 1-3.
  
Although different device type will have a different interface, they still have some icons in common.  
+
Although different device types will have a different interface, they still have some icons in common.  
  
Setting: change device name, check firmware version, enable/disable vibration switch.
+
Setting: change device name, chec the firmware version, enable/disable vibration switch.
  
[[Product]] info.:check manufacturer and model.
+
[[Product]] info.: check manufacturer and model.
  
Share: owner can share the device to other eWeLink accounts.
+
Share: the owner can share the device to other eWeLink users.
  
Timer: add new single/repeat schedules to turn on/off.
+
Timer: add new single/repeat schedules to turn on/off the device.
  
Countdown: add countdown timer to turn on/off.
+
Countdown: add countdown timers to turn on/off the device.
  
===Device Sharing===
+
===Device Settings===
Device owner can share the device to others, thus others can turn on/off on eWeLink. This function is great for family, it will be great to invite them to control together.
+
In the upper right corner, there's a button contains device "Setting" and "Delete". In "Setting", you can change the name of device and channel. Check firmware version and update to latest firmware. You can enable or disable touch vibration. And most importantly, you can set power on state for your device. Usually, when the electricity is cut off, when it comes again, your switch stays in off. Now by setting power on state, your device will automatically in ON, OFF or KEEP when power on. KEEP: your device will be in the same state as it is before electricity cut off.  
  
[[File:ewelink share device.jpg|400px]]
 
  
While sharing device, both should stay on eWeLink. Because if the account you want to share is not online, he will not receive the invitation message.  
+
[[File:device_settings.jpg|400px]]
 +
[[File:power_on_status.jpg|400px]]
  
How to make it? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, click Next. The other account will receive an invitation message. Click Accept, the device has shared successfully. He will have access to turn on/off the device.
+
'''Update''': all the 1 gang devices support to push notification message once device status change.
  
Only owner have right to delete the device, to change the timers. Once the device has been deleted, it will disappear from others’ shared list.
+
[[File:device_settings_1.jpg|400px]]
 +
 
 +
After enabling the notification, the phone/tablet that you are using the App with will receive device's latest status changes messages. Click the message, you'll enter the App and see the operation records.
 +
 
 +
[[File:device_status_push.jpg|400px]]
 +
 
 +
And you can check for these devices' operation records.
 +
 
 +
[[File:settings_top.jpg|400px]]
 +
 
 +
[[File:operation_records_1.jpg|400px]]
 +
 
 +
===Share Control===
 +
Device owner can share control of the devices to others, and thus others can turn on/off the device on eWeLink. Or you can create multiple accounts, add all device to one account, then share the devices with the other accounts. In sharing devices, the owner can authorize timer permissions to let the other users create, modify, edit and delete timers. This functionality is great for the family as it will be great to invite them to control together. The latest version supports to write a note in the sharing message,  you can write down your name so that the other user know who you are. There isn't a limit to the number of users you can share with.
 +
 
 +
[[File:share-1.jpg|400px]]
 +
 
 +
[[File:share-2.jpg|400px]]
 +
 
 +
While sharing devices, both should stay on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.
 +
 
 +
How to make it? Firstly click Share, enter the eWeLink account info.(select country code, enter the phone number or email address) you want to share, tick the timer permissions you want to give, then click OK. Remember do not enter the country code ahead of your phone number. The other account will receive an invitation message. When he/she click Accept, the device will be shared successfully. The other user has access to turn on/off the device and to change the timers.
 +
 
 +
Once the device has been deleted by the owner, it will also disappear from the others' shared list.
 +
 
 +
<span style="color:#FF0000"> Note:</span>
 +
 
 +
<span style="color:#FF0000">1.Only when the two accounts are registered with the servers of the same continent can be shared with, no cross-continent accounts can be shared. If you use VPN to create accounts, they may connect to the server of different continents. If you are located at the junction of two continents, for example, Asian-European junction, the two accounts may connect to different servers. It's impossible to share from a phone number based account to an email account or vice versa, because the phone number based account is connecting to Asian servers, while the email based account doesn't.</span>
 +
 
 +
<span style="color:#FF0000"> 2. The other users you share with can't access to scene, group or device power on status.</span>
  
 
===Timing Task===
 
===Timing Task===
 +
Timing task is a basic feature of all devices. The timing setting allows you to set a specified time to turn on/off the device. Please note that deal to chip capacity limit, it only supports totally 8 enabled timing tasks each device(including scheduled/countdown/loop timer). Currently, we provide three timing types: '''scheduled timing, countdown timing and loop timing'''.
 +
 +
====Schedule Timing====
 +
In schedule timer, you can set to turn on or off the device at the specified time for once or repeat dates.
 +
 
[[File:ewelink schedule timing.jpg|400px]]
 
[[File:ewelink schedule timing.jpg|400px]]
  
Timing task is a basic function to all devices. The timing setting allows you to set a specified time to turn on/off device. Currently, we provide two timing types: countdown/schedule timing. While in schedule timing, you can set single/repeat timing.  
+
====Countdown Timing====
 +
Countdown timer allows users to turn on/off the device after a preset time.  
  
 
[[File:ewelink countdown timer.jpg|400px]]
 
[[File:ewelink countdown timer.jpg|400px]]
  
Countdown timing allows you to turn on/off device after a preset time. The maximum countdown time is 24hr.
+
====Loop Timing====
 +
Loop timer can be auto-executed every preset time(say 1hr), and continue for a shorter preset time(say 20min). You can also choose not to tick the continuous cycle. For example, use loop timer to control oxygen pump for the fish tank. You can use loop timer to turn on oxygen pump every hour and keep it running for 20min and then auto-turn off each time.
 +
 
 +
The screenshot below is set the device to turn on every 10min and keep it working for 5min each time.
  
 
[[File:ewelink loop timer.png|400px]]
 
[[File:ewelink loop timer.png|400px]]
  
Single channel switch and socket support loop timer(Required firmware ver. 1.5.0 and higher). Loop timer can be auto-executed every preset time(say 1hr), and continue for a shorter preset time(say 20min). For example, use loop timer to control oxygen bump for fish tank. You can use loop timer to turn on oxygen bump every hour, and keep working for 20min and then auto-turn off the oxygen bump.
+
'''Loop timer supported devices (updating):'''all 1 gang switch/socket(required firmware ver. 1.5.0 and higher, G1 is excluded from the list), including S20 smart socket, Sonoff Touch EU/US, Sonoff Basic, Sonoff SV, Sonoff TH10/TH16, Sonoff RF, Slampher, Sonoff Pow (required firmware ver. 2.0.3 and higher), Motor Clockwise/ Anticlockwise Running WiFi Wireless Switch, 1 Channel Inching /Self-Locking WiFi Wireless Switch 5V/12V, S30 Smart Socket, Sonoff T1 UK/EU/US 1 Gang, RF Bridge 433-the added RF Remote, Sonoff Pow.
  
===Scene and Smart Scene===
+
===Scene ===
A scene is set up to auto-execute an action for all devices in the same scene. To add a new scene, you can add different existing devices, name your scene and save. The 2 channel and multi-channel devices can even set power on state: on, off or keep. By adding different scenes, you will not need to turn off the device one by one any more. For example, you have added a scene “Leave”, once you go out, take out your phone, tap on the scene “Leave”with a finger, all devices will be turned off.
+
A scene is set up to auto-execute an action for all devices in the same scene. There are three kinds of scenes, they are different in the trigger condition. The first one is triggered by a click, the second one is triggered by some data of a device, such as temperature, humidity, light, air quality and noise level, the third one is triggered by status from another device. Note that only device owner can create scenes, and <span style="color:#FF0000">the system can save max 21 scenes(this limit was added at the end of 2017).</span> Scenes can't be shared to other users.
  
[[File:ewelink_sonoff_th_smart_scene.jpg|400px]]
+
<span style="color:#FF0000">IFTTT doesn't support to use one applet to trigger another applet, so as our scene feature. </span>
  
A smart scene can is set up to use smart scene trigger devices such as Sonoff SC, TH device([[Sonoff TH]], [[Sonoff]] TH10, [[Sonoff]] TH16, S22) to set condition to trigger ON/OFF other devices on your account.
+
For example, you created two scenes: when device A is turned on, then turn on device B.
 +
When device B is turned on, then turn on device C.
 +
The result is: When your device A is turned on, only device B can be turned on, while device C won't be turned on.
  
As eWeLink are supporting more and more brands and types, we will develop all kinds of smart scenes. For example, when you open a curtain, the LED will automatically adjust its brightness or turn off by sensing the real light. Another example, when you shut your door, the LEDs and home appliances will be automatically turned off, thus saving energy.
+
 
 +
====Click to execute====
 +
 
 +
By creating a scene like this, users can turn on/off a group of devices simultaneously. For example, create a scene “Leave”, add all the devices to be set on or off to the scene, save it. Once you shut the door, take out your phone and enter into the scene, go to scene “Leave”, tap on “Run”, all devices will be turned off immediately.
 +
 
 +
[[File:scene_click_to_execute.jpg|400px]]
 +
 
 +
 
 +
Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it. The 2 channel and multi-channel devices can even set power on state: on, off or keep.
 +
 
 +
[[File:scene_run.jpg|400px]]
 +
 
 +
If you don't find your device on the list, please check if your app version is too low. You should always update to the latest version, which supports most features.
 +
 
 +
 
 +
====Triggered by device data range====
 +
 
 +
This kind of scene is usually called smart scene. Users can set a data range as a condition to trigger ON/OFF other devices. You may set a specified temperature/humidity/light intensity/sound level range from Sonoff SC, Sonoff TH, S22, At Home/Away status from Nest or RF Bridge's alarm as a condition to trigger on/off one or more smart devices under your account.
 +
 
 +
[[File:scene_trigger_by_device.jpg|390px]][[File:ewelink_sonoff_th_smart_scene.jpg|400px]]
 +
 
 +
Supported Devices(updating):
 +
 
 +
Trigger devices: Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433 (Android 3.1.0 and higher)-the added Alarms.
 +
 
 +
Execute devices: except the trigger devices, all ITEAD smart devices are included, RF Bridge 433 (Android 3.1.0 and higher)-the added RF Remote controller.
 +
 
 +
====Triggered by device status====
 +
 
 +
We have supported a new type of scene that triggered by device's status. If device A status get changed, then the status of selected device will change to preset status.
 +
 
 +
For example, you can set when Sonoff SV is ON, then execute turn on 4ch light one and turn off B1.
 +
 
 +
[[File:scene_condition.jpg|400px]][[File:scene_multichannel.jpg|400px]][[File:scene_by_status.jpg|400px]]
 +
 
 +
'''Works with Google Nest'''
 +
 
 +
eWeLink is compatible with Nest now! Check out how to use Nest to create smart scenes to control Sonoff devices [https://www.itead.cc/blog/ewelink-works-with-nest here].
 +
 
 +
Supported Devices(updating):
 +
 
 +
Trigger devices: all devices except Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433
 +
 
 +
Execute devices: all devices except Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433
  
 
===User Center===
 
===User Center===
 
In user center, users can see some settings and information.  
 
In user center, users can see some settings and information.  
  
[[File:ewelink info.jpg|400px]]
+
[[File:Ewelink_center.jpg|400px]]
  
On the top, you can see how many group and scene you have created.  
+
On the top, users can see how many groups and scenes they have created.  
  
Feedback:you can submit a feedback on Feedback, our IT support will follow up your feedback.  
+
Feedback: Users can submit your feedback on Feedback. Our IT support will follow up the feedback and reply in workdays.  
  
Switch Language:you can switch among different languages.
+
You can also submit feedback on the login interface, as shown below:
  
You can change nickname and password here. Also, you can check APP version and update to the latest one.  
+
[[File:feedback_1.png|400px]]
 +
[[File:feedback.jpg|400px]]
 +
 
 +
Switch Language: Users can switch between different languages.
 +
 
 +
Users can change nickname and password here. Also, they can check APP version and update to the latest one.  
  
 
[[File:ewelink introduction.jpg|400px]]
 
[[File:ewelink introduction.jpg|400px]]
  
In About eWeLink, you will see the QR code, which is our WeChat subscription account, by following our account, you can control your devices on WeChat page. We will post article introducing our new smart home devices, and user guide there.  
+
In "About eWeLink", you will see the QR code, which is our WeChat subscription account. By following our account, you can control your devices on WeChat page. We will post articles introducing our new smart home devices, and user guide there.  
  
We will develop more functions for WeChat control.
+
We will develop more functions for WeChat control in the future.
 +
 
 +
===LAN Control===
 +
iOS & Android eWeLink V3.5.0 and higher have supported LAN control function! When your WiFi can't access the Internet or if our server is down, don't worry your devices will go offline, simply enable the LAN control, you can still turn on/off the devices on app. Remember to keep your WiFi connection with our app.
 +
 
 +
The below 1-gang Sonoff devices with simple on/off feature support control via LAN (require firmware 1.8.0 and higher):
 +
 
 +
Sonoff S20, Sonoff S26, Sonoff S85, Sonoff S30, Sonoff Basic, Sonoff RF, Sonoff Slampher, Sonoff SV, S31 Lite, Sonoff T1 UK/US/EU-1 Gang, Sonoff Touch EU/US, 1 Channel Inching /Self-lockIing Mode WiFi Wireless Switch 5V/12V, Inching /self-locking WiFi Wireless Switch 5V.
 +
 
 +
eWeLink devices from other brands can also support LAN control, note that only the 1 gang devices that only have simple on/off feature are supported. Currently, other devices like the power measuring device, temperature measuring device don't support LAN control function.
 +
 
 +
Demonstration video:https://www.youtube.com/watch?v=5ImBehZO46I&feature=share
  
 
===Desktop Widget===
 
===Desktop Widget===
Line 139: Line 256:
 
[[File:ewelink desktop widget.png|400px]]
 
[[File:ewelink desktop widget.png|400px]]
  
eWeLink android version support to add device widget to phone desktop. By dragging the devices to phone desktop, users can directly see device real-time state and directly turn on/off. But this function may not work for some Andriod version, we will continuously optimize it.
+
eWeLink android version supports to add device widget to phone desktop. By adding the devices widget to the desktop, users can directly see device's real-time state and directly tap to turn on/off. Note: all 1 gang switches and sockets and 4 gang switches support widget. For Sonoff TH10/TH16, ver 2.3.3 and higher support widget.
 +
 
 +
These products don't support to set widget (updating): Sonoff B1, Sonoff Dual, Sonoff TH10/TH16(Versions lower than 2.3.3), S22, Sonoff SC, Sonoff Hum, Sonoff T1 (2-3 gang), RF Bridge 433, iFan, all eWeLink supported 2-3 gang products(include other brands).

Latest revision as of 09:45, 3 July 2018

Overview

eWeLink is a smart home control APP that can control all ITEAD home automation devices and cooperated products. It allows you to remote control and manage your favorite smart devices of different brands in a single App. The smart home devices connect to home appliances and electronic devices via WiFi, allowing you to remote control through the APP eWeLink. There isn't a limit to the number of devices you can add to eWeLink, although we usually say 150.

eWeLink Basic Functions:

Remote on/off

Countdown/schedule timer

Share control

Group/scene management

Scene/smart scene

By adding the smart home devices to the eWeLink account, users can control the devices by following and accessing to Coolkit's WeChat subscription account, or by adding a widget to mobile desktop later on.

Users can download latest iOS eWeLink from Apple APP Store and Android eWeLink from Google Play. Please scan below QR code. If you are using a lower version, please uninstall and then scan and download the latest version.

EWeLink.png

Now we will explain how to use eWeLink.

Registration and Log in

eWeLink supports multiple languages. It currently includes simplified Chinese, traditional Chinese, English, Danish, Russian, Italian, Polish, France, Spanish, German, Turkish, Slovakia, Greece, Bulgaria, Czech, Slovenian, Portuguese(Brazil), etc. It will support more languages in the future.

Ewelink login.jpg

It supports registration by email or mobile phone number. We suggest you update your app to the latest version. Users from Asian countries should register with mobile phone number. While users outside Asian area should register with email address. Turkey users also need to register with phone number.But sometimes the app will judge which server is more stable in your location, then it will auto judge whether to let you connect with Asian servers (register with phone number) or other servers(register with email).


Select your country/region code, input a valid mobile phone number, then your phone will receive an SMS containing a verification code on the phone number you provided. If you do not receive the SMS, please disable SMS blocking. If registered by email address, you'll also need to select a random country code, you’ll receive an email containing a verification code. Fill in the verification code and password, confirm password and submit. For safety, the password should be no less than 8 characters. If you failed to receive any code, please submit a feedback on the App.

One account can only log in to one mobile phone. If you have logged in with phone A, later you log in with phone B, your device will auto-exit from phone A.

Reset Password

Forget pwd 1.png

If you forget your password, please log out, go to the login interface. Click "Forget Password" to reset.

Reset password 1.jpg Reset password 2.jpg

WiFi Pairing and Device Addition

eWeLink obtains device status and controls devices by sending commands through the cloud server. This means all devices must first connect to the WiFi router and connect to our Amazon AWS server. So every new device must be paired with user's home WiFi and added to eWeLink account.

Before adding a device, Android phone must allow WiFi. Please make sure the WiFi your phone connects is the same as the one you select in eWeLink device pairing WiFi option. Please note that all eWeLink products should be paired via the WiFi router, starting from 3.1.0, LAN is not allowed any more.

Instructions are given below on how to pair with WiFi and add a new device:

Ewelink add device (2).jpg

Step 1. Long press your device WiFi pairing button until it begins fast blinking.

Step 2. Open eWeLink. Click "+" to add the device. For Android, please select the pairing icon according to how the LED blinks. Click NEXT.

For iOS, please go to phone Setting>WiFi>connect to the WiFi that begins with ITEAD-*****, enter default password 12345678. Then go back to eWeLink, select the pairing icon (TOUCH or AP) according to how the LED blinks. Tap on NEXT.

Pairing icons.jpg

A reminder here: if the phone asks a similar question like "eWeLink wants to locate your position, accept or reject?" Then please always click ACCEPT. Otherwise, it may cause a failed pairing.

Ewelink pairing.jpg

Step 3. Enter your home WiFi SSID and password. You must make sure the WiFi your are entering with is the same with the one your phone connecting. If different, it will cause offline problem. If no password, keep it blank. For the present, eWeLink only supports 2.4G wifi communication protocol. 5G band Wi-Fi network is not supported. Tap on NEXT.

Ewelink name device.jpg

Step 4. eWeLink will auto-search and connect to your device. After this process, you can name the device and submit. That's all!

After successfully added, make sure you don't change the WiFi the product connects. Once you change the WiFi, you must delete and re-add it to your account via the new WiFi.

Device List

Ewelink all devices.jpg

After successfully added, all devices will be seen in the device list. Users can see which devices are online which are not. Users can also see WiFi signal strength, and whether there is new firmware to update, etc. Users can directly turn on/off the device by tapping the small switch icon. Besides, users can delete devices by tapping on the delete icon. Tap on the clock icon to see all timing schedules.

Ewelink group management.jpg

If you have too many devices, you may group them. Tap on the top "All Device" option to expand the group information. Click "Manage Group" to set up different group for your devices.

Device Details

Tap on a specified device to enter into device control interface. Different devices will have different functions and layout. Take some devices for example.

EWeLink Control Interface.jpg

For Sonoff TH, users can see real time temperature and humidity. It also provides the capability to set manual/auto control mode. For dimming LED, users can adjust light color and brightness. For iFan, users can adjust among natural/sleep/normal mode, and in normal mode, users can adjust the wind level from 1-3.

Although different device types will have a different interface, they still have some icons in common.

Setting: change device name, chec the firmware version, enable/disable vibration switch.

Product info.: check manufacturer and model.

Share: the owner can share the device to other eWeLink users.

Timer: add new single/repeat schedules to turn on/off the device.

Countdown: add countdown timers to turn on/off the device.

Device Settings

In the upper right corner, there's a button contains device "Setting" and "Delete". In "Setting", you can change the name of device and channel. Check firmware version and update to latest firmware. You can enable or disable touch vibration. And most importantly, you can set power on state for your device. Usually, when the electricity is cut off, when it comes again, your switch stays in off. Now by setting power on state, your device will automatically in ON, OFF or KEEP when power on. KEEP: your device will be in the same state as it is before electricity cut off.


Device settings.jpg Power on status.jpg

Update: all the 1 gang devices support to push notification message once device status change.

Device settings 1.jpg

After enabling the notification, the phone/tablet that you are using the App with will receive device's latest status changes messages. Click the message, you'll enter the App and see the operation records.

Device status push.jpg

And you can check for these devices' operation records.

Settings top.jpg

Operation records 1.jpg

Share Control

Device owner can share control of the devices to others, and thus others can turn on/off the device on eWeLink. Or you can create multiple accounts, add all device to one account, then share the devices with the other accounts. In sharing devices, the owner can authorize timer permissions to let the other users create, modify, edit and delete timers. This functionality is great for the family as it will be great to invite them to control together. The latest version supports to write a note in the sharing message, you can write down your name so that the other user know who you are. There isn't a limit to the number of users you can share with.

Share-1.jpg

Share-2.jpg

While sharing devices, both should stay on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message.

How to make it? Firstly click Share, enter the eWeLink account info.(select country code, enter the phone number or email address) you want to share, tick the timer permissions you want to give, then click OK. Remember do not enter the country code ahead of your phone number. The other account will receive an invitation message. When he/she click Accept, the device will be shared successfully. The other user has access to turn on/off the device and to change the timers.

Once the device has been deleted by the owner, it will also disappear from the others' shared list.

Note:

1.Only when the two accounts are registered with the servers of the same continent can be shared with, no cross-continent accounts can be shared. If you use VPN to create accounts, they may connect to the server of different continents. If you are located at the junction of two continents, for example, Asian-European junction, the two accounts may connect to different servers. It's impossible to share from a phone number based account to an email account or vice versa, because the phone number based account is connecting to Asian servers, while the email based account doesn't.

2. The other users you share with can't access to scene, group or device power on status.

Timing Task

Timing task is a basic feature of all devices. The timing setting allows you to set a specified time to turn on/off the device. Please note that deal to chip capacity limit, it only supports totally 8 enabled timing tasks each device(including scheduled/countdown/loop timer). Currently, we provide three timing types: scheduled timing, countdown timing and loop timing.

Schedule Timing

In schedule timer, you can set to turn on or off the device at the specified time for once or repeat dates.

Ewelink schedule timing.jpg

Countdown Timing

Countdown timer allows users to turn on/off the device after a preset time.

Ewelink countdown timer.jpg

Loop Timing

Loop timer can be auto-executed every preset time(say 1hr), and continue for a shorter preset time(say 20min). You can also choose not to tick the continuous cycle. For example, use loop timer to control oxygen pump for the fish tank. You can use loop timer to turn on oxygen pump every hour and keep it running for 20min and then auto-turn off each time.

The screenshot below is set the device to turn on every 10min and keep it working for 5min each time.

Ewelink loop timer.png

Loop timer supported devices (updating):all 1 gang switch/socket(required firmware ver. 1.5.0 and higher, G1 is excluded from the list), including S20 smart socket, Sonoff Touch EU/US, Sonoff Basic, Sonoff SV, Sonoff TH10/TH16, Sonoff RF, Slampher, Sonoff Pow (required firmware ver. 2.0.3 and higher), Motor Clockwise/ Anticlockwise Running WiFi Wireless Switch, 1 Channel Inching /Self-Locking WiFi Wireless Switch 5V/12V, S30 Smart Socket, Sonoff T1 UK/EU/US 1 Gang, RF Bridge 433-the added RF Remote, Sonoff Pow.

Scene

A scene is set up to auto-execute an action for all devices in the same scene. There are three kinds of scenes, they are different in the trigger condition. The first one is triggered by a click, the second one is triggered by some data of a device, such as temperature, humidity, light, air quality and noise level, the third one is triggered by status from another device. Note that only device owner can create scenes, and the system can save max 21 scenes(this limit was added at the end of 2017). Scenes can't be shared to other users.

IFTTT doesn't support to use one applet to trigger another applet, so as our scene feature.

For example, you created two scenes: when device A is turned on, then turn on device B. When device B is turned on, then turn on device C. The result is: When your device A is turned on, only device B can be turned on, while device C won't be turned on.


Click to execute

By creating a scene like this, users can turn on/off a group of devices simultaneously. For example, create a scene “Leave”, add all the devices to be set on or off to the scene, save it. Once you shut the door, take out your phone and enter into the scene, go to scene “Leave”, tap on “Run”, all devices will be turned off immediately.

Scene click to execute.jpg


Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it. The 2 channel and multi-channel devices can even set power on state: on, off or keep.

Scene run.jpg

If you don't find your device on the list, please check if your app version is too low. You should always update to the latest version, which supports most features.


Triggered by device data range

This kind of scene is usually called smart scene. Users can set a data range as a condition to trigger ON/OFF other devices. You may set a specified temperature/humidity/light intensity/sound level range from Sonoff SC, Sonoff TH, S22, At Home/Away status from Nest or RF Bridge's alarm as a condition to trigger on/off one or more smart devices under your account.

Scene trigger by device.jpgEwelink sonoff th smart scene.jpg

Supported Devices(updating):

Trigger devices: Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433 (Android 3.1.0 and higher)-the added Alarms.

Execute devices: except the trigger devices, all ITEAD smart devices are included, RF Bridge 433 (Android 3.1.0 and higher)-the added RF Remote controller.

Triggered by device status

We have supported a new type of scene that triggered by device's status. If device A status get changed, then the status of selected device will change to preset status.

For example, you can set when Sonoff SV is ON, then execute turn on 4ch light one and turn off B1.

Scene condition.jpgScene multichannel.jpgScene by status.jpg

Works with Google Nest

eWeLink is compatible with Nest now! Check out how to use Nest to create smart scenes to control Sonoff devices here.

Supported Devices(updating):

Trigger devices: all devices except Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433

Execute devices: all devices except Sonoff SC, Sonoff TH (old version), Sonoff TH10, Sonoff TH16, S22, Nest Thermostat, RF Bridge 433

User Center

In user center, users can see some settings and information.

Ewelink center.jpg

On the top, users can see how many groups and scenes they have created.

Feedback: Users can submit your feedback on Feedback. Our IT support will follow up the feedback and reply in workdays.

You can also submit feedback on the login interface, as shown below:

Feedback 1.png Feedback.jpg

Switch Language: Users can switch between different languages.

Users can change nickname and password here. Also, they can check APP version and update to the latest one.

Ewelink introduction.jpg

In "About eWeLink", you will see the QR code, which is our WeChat subscription account. By following our account, you can control your devices on WeChat page. We will post articles introducing our new smart home devices, and user guide there.

We will develop more functions for WeChat control in the future.

LAN Control

iOS & Android eWeLink V3.5.0 and higher have supported LAN control function! When your WiFi can't access the Internet or if our server is down, don't worry your devices will go offline, simply enable the LAN control, you can still turn on/off the devices on app. Remember to keep your WiFi connection with our app.

The below 1-gang Sonoff devices with simple on/off feature support control via LAN (require firmware 1.8.0 and higher):

Sonoff S20, Sonoff S26, Sonoff S85, Sonoff S30, Sonoff Basic, Sonoff RF, Sonoff Slampher, Sonoff SV, S31 Lite, Sonoff T1 UK/US/EU-1 Gang, Sonoff Touch EU/US, 1 Channel Inching /Self-lockIing Mode WiFi Wireless Switch 5V/12V, Inching /self-locking WiFi Wireless Switch 5V.

eWeLink devices from other brands can also support LAN control, note that only the 1 gang devices that only have simple on/off feature are supported. Currently, other devices like the power measuring device, temperature measuring device don't support LAN control function.

Demonstration video:https://www.youtube.com/watch?v=5ImBehZO46I&feature=share

Desktop Widget

Ewelink desktop widget 1.png Ewelink desktop widget.png

eWeLink android version supports to add device widget to phone desktop. By adding the devices widget to the desktop, users can directly see device's real-time state and directly tap to turn on/off. Note: all 1 gang switches and sockets and 4 gang switches support widget. For Sonoff TH10/TH16, ver 2.3.3 and higher support widget.

These products don't support to set widget (updating): Sonoff B1, Sonoff Dual, Sonoff TH10/TH16(Versions lower than 2.3.3), S22, Sonoff SC, Sonoff Hum, Sonoff T1 (2-3 gang), RF Bridge 433, iFan, all eWeLink supported 2-3 gang products(include other brands).