Colorduino V1.4

From ITEAD Wiki
Revision as of 06:19, 11 September 2014 by ITead (Talk | contribs)

Jump to: navigation, search

Overview

IM140806001 4.jpg

Colorsduino is a magic RGB LED dot-matrix driver compatible with Arduino . Colorsduino pairs the M54564 with a single DM163 constant current driver. By using the DM163, Colorduino gains three 8+6-bit channels of hardware PWM control of the LED’s freeing up the MCU from having to implement it in software. This gives the ATmega328 more CPU bandwidth for performing other tasks. Colorduino is easy to cascade by IIC and Power interface.

Note: 1.4 version has been removed the switch compared to 1.3 version.

Go shopping [[[Colorduino]] (SKU:IM140806001)]

Features

  • 8bits colors support with 6bits correction for each color in every dots
  • Hardware 16MHz PWM support
  • Without any external circuits, play and shine
  • Dedicated GPIO and ADC interface
  • Hardware UART and IIC communication with easy cascading
  • 24 constant current channels of 100mA each
  • 8 super source driver channels of 500mA each

Spec

PCB size 60mm X 60mm X 1.6mm
Microprocessor Atmega328P
Indicator PWR State
Power supply 5V~7.5V DC(7.5V Max)
Cascade power connector Terminal Blocks
Program interface UART/ISP
Expansion socket 100mil bended pin header pair
Communication protocols UART/IIC
RoHS Yes

Electrical Characteristics

Specification Min. Typical Value Max. Unit
Power Voltage(VIN) 6.5 7.5 VDC
Power Voltage(VDD) 4.5 5 5.5 VDC
Input Voltage VH: 4.5 5 5.5
Input Voltage VL: -0.3 0 0.5 V
Current Consumption(Except LED matrix) - 20 40 mA
Drive current(Every channel) 500 mA
Drive current(Every dot) 58 mA
Circuit response time 10 ns
RGB LED-Matrix color resolution per dot 16M
Uart Baud rate 9600 115200 bps

Hardware

IM140806001pic1.jpg IM140806001pic2.jpg IM140806001 3.jpg

Pad Name Type Description
SDA I/O Data wire of IIC Bus
SCL I/O Clock wire of IIC Bus
GND G Ground plane
VDD P Power wire for all digital components
RXD I/O Data wire of UART Bus
TXD I/O Data wire of UART Bus
DTR I Special reset wire of Arduino program
VIN P Power wire for all LEDs and Super current driver
MI I/O Data input of ISP
MO I/O Data output of ISP
SCK I/O Clock input of ISP
RST I Reset input of ISP

Download

Datasheet for Colorduino

Datasheet for DM163

Datasheet for M54564FP

Schematic for Colorduino

Demo Code for Colorduino

Fritzing Parts for Colorduino

Useful Link

Lincomatic' DIY Blog <iTead Studio Colorduino – A Preview>

Nick's LED Projects <Colorduino>