Difference between revisions of "Big Easy Driver"

From ITEAD Wiki
Jump to: navigation, search
(Download)
m (Links to existing pages added by LinkTitles bot.)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
==Overview==
 
==Overview==
 
[[File:Big Easy Driver.jpg|thumb|400px|right]]
 
[[File:Big Easy Driver.jpg|thumb|400px|right]]
The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4983 stepper driver chip. It's the next version of the popular Easy Driver board.
+
The [[Big Easy Driver]], designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4983 stepper driver chip. It's the next version of the popular Easy Driver board.
  
 
Each BigEasyDriver can drive up to about 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 35V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling, a heatsink is recommended for loads approaching 2A/phase. You can find the recommended heatsink in the related items below.
 
Each BigEasyDriver can drive up to about 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 35V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling, a heatsink is recommended for loads approaching 2A/phase. You can find the recommended heatsink in the related items below.
 +
 +
Go shopping [http://imall.iteadstudio.com/im121101001.html Big Easy Driver (IM121101001)]
  
 
==Features==
 
==Features==
Line 19: Line 21:
  
 
==Useful Links==
 
==Useful Links==
 +
[http://www.schmalzhaus.com/BigEasyDriver/ by Brian Schmalz  <Big Easy Driver Stepper Motor Driver>]

Latest revision as of 10:16, 15 June 2014

Overview

Big Easy Driver.jpg

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based on the Allegro A4983 stepper driver chip. It's the next version of the popular Easy Driver board.

Each BigEasyDriver can drive up to about 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 35V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling, a heatsink is recommended for loads approaching 2A/phase. You can find the recommended heatsink in the related items below.

Go shopping Big Easy Driver (IM121101001)

Features

  • Bi-polar Microstepping Driver
  • 2A/Phase Max
  • Max Motor Drive Voltage: 35V
  • On-board 5V/3.3V Regulation

Download

Datasheet for A4983

Schematic

Source File

Useful Links

by Brian Schmalz