Difference between revisions of "Big Button"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "==Overview== ==Features== ==Specifications== ==Electrical Characteristics== ==Demo== ==Download== ==Useful Links==")
 
(Overview)
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Overview==
 
==Overview==
 +
 +
[[File:Button switch.jpg|thumb|400px|right]]
 +
What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.
 +
 +
Electronic brick of button switch is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.
 +
 +
Go shopping [http://imall.iteadstudio.com/im120710022.html Big Button (IM120710022)]
  
 
==Features==
 
==Features==
 +
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.
 +
 +
http://imall.iteadstudio.com/media/wysiwyg/Products/ElectronicBrick/IM120710022_2.jpg
 +
 +
2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock
 +
 +
http://imall.iteadstudio.com/media/wysiwyg/Products/ElectronicBrick/IM120710022_3.jpg
 +
 +
3. Hardware with debouncing function for more stable output
 +
 +
http://imall.iteadstudio.com/media/wysiwyg/Products/ElectronicBrick/IM120710022_4.jpg
  
 
==Specifications==
 
==Specifications==
 +
{| border="1"
 +
 +
| PCB size||36.0mm X 14.0mm X 1.6mm
 +
|-
 +
| Working voltage||3.3 or 5V DC
 +
|-
 +
| Operating voltage||3.3 or 5V DC
 +
|-
 +
| Compatible interfaces||2.54 3-pin interface and 4-pin Grove interface(1)
 +
|}
 +
 +
''Note 1: S for digital output port, V and G for voltage at the common collector and ground respectively. Generally speaking, digital output is VCC; when the button is pressed down, the digital output is 0V.''
  
 
==Electrical Characteristics==
 
==Electrical Characteristics==
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Parameter'''
 +
| align="center" style="background:#f0f0f0;"|'''Min.'''
 +
| align="center" style="background:#f0f0f0;"|'''Typical'''
 +
| align="center" style="background:#f0f0f0;"|'''Max.'''
 +
| align="center" style="background:#f0f0f0;"|'''Unit'''
 +
|-
 +
| Working voltage||3||5||5.5||VDC
 +
|-
 +
| Digital output voltage(VCC=5V)||0||-||5||V
 +
|}
  
 
==Demo==
 
==Demo==
 +
Connect S port of electronic brick of button switch to D2 port of Arduino board, and we will use the following program to read the digital value. When the digital value is high level, LED lamp will be ON; when the digital value is low level, LED lamp will be OFF.
 +
 +
  int Button=2;      //connect button to D2
 +
  int LED=13;
 +
  void setup()
 +
  {
 +
  pinMode(LED, OUTPUT);
 +
  pinMode(Button, INPUT); 
 +
  }
 +
 
 +
  void loop()
 +
  { 
 +
  if(digitalRead(Button)==HIGH)  //when the digital output value of button is high, turn on the LED.
 +
  {
 +
    digitalWrite(LED, HIGH); 
 +
  } 
 +
  if(digitalRead(Button)==LOW)  //when the digital output value of button is low, turn off the LED.
 +
  {
 +
    digitalWrite(LED, LOW);
 +
  }
 +
  }
  
 
==Download==
 
==Download==
 +
[ftp://imall.iteadstudio.com/Electronic_Brick/IM120710022/DS_IM120710022.pdf Datasheet]
 +
 +
[ftp://imall.iteadstudio.com/Electronic_Brick/IM120710022/SCH_IM120710022.pdf Schematic]
 +
 +
[ftp://imall.iteadstudio.com/Electronic_Brick/IM120710022/DEMO_IM120710022.zip Demo Code]
  
 
==Useful Links==
 
==Useful Links==

Latest revision as of 06:51, 11 June 2014

Overview

Button switch.jpg

What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.

Electronic brick of button switch is finger-sized, which can be connected to I/O port of main board or externally disconnected to check the switch state so as to control ON/OFF of LED lamp.

Go shopping Big Button (IM120710022)

Features

1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

IM120710022_2.jpg

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock

IM120710022_3.jpg

3. Hardware with debouncing function for more stable output

IM120710022_4.jpg

Specifications

PCB size 36.0mm X 14.0mm X 1.6mm
Working voltage 3.3 or 5V DC
Operating voltage 3.3 or 5V DC
Compatible interfaces 2.54 3-pin interface and 4-pin Grove interface(1)

Note 1: S for digital output port, V and G for voltage at the common collector and ground respectively. Generally speaking, digital output is VCC; when the button is pressed down, the digital output is 0V.

Electrical Characteristics

Parameter Min. Typical Max. Unit
Working voltage 3 5 5.5 VDC
Digital output voltage(VCC=5V) 0 - 5 V

Demo

Connect S port of electronic brick of button switch to D2 port of Arduino board, and we will use the following program to read the digital value. When the digital value is high level, LED lamp will be ON; when the digital value is low level, LED lamp will be OFF.

 int Button=2;       //connect button to D2
 int LED=13;
 void setup()
 {
 pinMode(LED, OUTPUT);
 pinMode(Button, INPUT);  
 }
 
 void loop()
 {   
 if(digitalRead(Button)==HIGH)   //when the digital output value of button is high, turn on the LED.
 {
   digitalWrite(LED, HIGH);   
 }   
 if(digitalRead(Button)==LOW)  //when the digital output value of button is low, turn off the LED.
 {
   digitalWrite(LED, LOW);
 } 
 }

Download

Datasheet

Schematic

Demo Code

Useful Links