Difference between revisions of "Arduino USB Host Shield"

From ITEAD Wiki
Jump to: navigation, search
(Download)
(Overview)
 
Line 8: Line 8:
 
keyboard and PS3 controller are ready with Bluetooth and digital cameras in the  
 
keyboard and PS3 controller are ready with Bluetooth and digital cameras in the  
 
works.
 
works.
 +
 +
Go shopping [http://imall.iteadstudio.com/im120417019.html Arduino USB Host Shield (IM120417019)]
  
 
==Features==
 
==Features==

Latest revision as of 06:13, 11 June 2014

Overview

ITEAD USB HOST SHIELD.jpg

The USB Host Shield contains all of the digital logic and analog circuit necessary to implement a full-speed USB peripheral/host controller with Arduino. This shield adds USB Host capabilities to popular Arduino platform. C Software support for new devices is constantly added; at the moment, code for USB keyboard and PS3 controller are ready with Bluetooth and digital cameras in the works.

Go shopping Arduino USB Host Shield (IM120417019)

Features

  • USB 2.0 Full Speed compatible
  • 3.3/5V operation level compatible
  • All GPIOx pins break-out
  • USB Host 5V/500mA supply for USB protocol

Specifications

PCB size 56mm X 54mm X 1.6mm
Indicators PWR
RoSH Yes

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage (Vlogic) 3 5.5 VDC
Input voltage VH 0.7Vlogic V
Input voltage VL 0.3Vlogic V
Current Consumption 70 mA

Hardware

IM120417019_Arduino_USB_Host_Shield_1.jpg

Figure 1 Top Map

Arduino Socket defination:

Pin Description
D0 UART_Rx
D1 UART_Tx
D2 -
D3 -
D4 -
D5 -
D6 -
D7 -
D8 -
D9 -
D10 SPI-CSn
D11 SPI-MOSI
D12 SPI-MISO
D13 SPI-SCK
A0 AD0
A1 AD1
A2 AD2
A3 AD3
A4 IIC_SCL
A5 IIC_SDA

GPIOx Break-out detail

As the figure 2 shown, all the GPIOx are all breakout.

ITEAD USB HOST SHIELD1.jpg

3.3/5V Operation Switch

When the based board is run in 3.3V, the switch should be set to 3.3V. And when the based board is run in 5V, the switch should be set to 5V.

Download

Datasheet for Arduino USB Host Shield

Schematic for Arduino USB Host Shield

Demo Code for Arduino USB Host Shield

Useful Links