Difference between revisions of "Arduino 3.2 TFT LCD Touch Shield V2"

From ITEAD Wiki
Jump to: navigation, search
m
m (Overview)
Line 6: Line 6:
 
The Arduino 3.2" TFT LCD Touch [[shield]] V2 can work with both 3.3V and 5V, so it can dispaly on Chipkit MAX32 as well.
 
The Arduino 3.2" TFT LCD Touch [[shield]] V2 can work with both 3.3V and 5V, so it can dispaly on Chipkit MAX32 as well.
  
'''NOTE:''' this screen adopts new chip, thus the old library is not applicable. Please use the [https://github.com/itead/ITEADLIB_Arduino_UTFT_Pro New UTFT Library].
+
'''NOTE:''' this screen adopts new driver IC, thus the old library is not applicable. Please use the [https://github.com/itead/ITEADLIB_Arduino_UTFT_Pro New UTFT Library].
  
 
Go shopping [3.2 TFT LCD Touch Shield V2(IM160418006) Coming Soon!!!]
 
Go shopping [3.2 TFT LCD Touch Shield V2(IM160418006) Coming Soon!!!]

Revision as of 08:53, 29 June 2016

Overview

3.2 TFT LCD TOUCH SHIELD.jpg

Arduino 3.2" TFT LCD Touch shield V2 is an Arduino Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino MEGA shield compatible pinout for attachment. The TFT driver is based on ILI9341 with 8bit data and 4bit control interface.

The Arduino 3.2" TFT LCD Touch shield V2 can work with both 3.3V and 5V, so it can dispaly on Chipkit MAX32 as well.

NOTE: this screen adopts new driver IC, thus the old library is not applicable. Please use the New UTFT Library.

Go shopping [3.2 TFT LCD Touch Shield V2(IM160418006) Coming Soon!!!]

Features

  • Arduino Mega Shield compatible footprint
  • Arduino new UTFT library support
  • TFTResolution : 240 x 320 pixels
  • Size : 3.2"
  • Colors : 65K
  • Backlight : LED
  • Driver IC: ILI9341

Specifications

PCB size 79.3mm X 57.5mm X 1.6mm
Indicators -
Power supply compatible with Arduino Mega
Communication Protocol -
RoHS Yes

Electrical Characteristics

Specification Min Type Max Unit
Power Voltage 4.5 5 5.5 VDC
Input Voltage VH: 3 - 5.5 V
Input Voltage VL: -0.3 0 0.5 V

Hardware

IM120417021_3.2_TFT_LCD_Touch_Shield.jpg

Figure 1 Bottom View

Pin map of Arduino 3.2” TFT Touch Shield V2:

Arduino Mega PIN Description
D2 T_IRQ
D3 T_DOUT
D4 T_DIN
D5 T_CS
D6 T_CLK
D22 DB8
D23 DB9
D24 DB10
D25 DB11
D26 DB12
D27 DB13
D28 DB14
D29 DB15
D30 DB7
D31 DB6
D32 DB5
D33 DB4
D34 DB3
D35 DB2
D36 DB1
D37 DB0
D38 RS
D39 WR
D40 CS
D41 RST
D50 SD_MISO
D51 SD_MOSI
D52 SD_SCK
D53 SD_NSS

The Arduino 3.2” Touch shield V2 uses the ILI9341 controller , it support 16bit data interface. The touch IC is XPT2046.

Operation voltage level setting switch

When using the Arduino 3.2 TFT Touch shield V2 with 5V operation level development board – like Arduino MEGA and so on, set the operation voltage level switch to 5V side.

When using the Arduino 3.2 TFT Touch shield V2 with 3.3V operation level development board set the operation voltage level switch to 3.3V side.

Download

Demo code

Schematic

New UTFT Library

Useful Links