Difference between revisions of "2.4 TFT LCD Touch shield"

From ITEAD Wiki
Jump to: navigation, search
m
m (V2 Change List)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Overview==
+
{| class="FCK__ShowTableBorders" align="left"
 
+
[[File:2.4TFT LCD Touch shield.jpg|thumb|400px|right]]
+
Arduino 2.4" TFT LCD Touch [[shield]] is an Arduino UNO/ Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available in an Arduino [[shield]] compatible pinout for attachment. The TFT driver is based on ILI9325D with 8bit data and 4bit control interface.
+
 
+
The Arduino 2.4" TFT LCD Touch [[shield]] can work with both 3.3V and 5V, so it can dispaly on Chipkit UNO32 and Simplecortex as well.
+
 
+
Go shopping [http://imall.iteadstudio.com/im120417012.html 2.4 TFT LCD Touch shield (IM120417012)]
+
 
+
==Features==
+
* Compatible with 3.3/5V operation voltage level
+
* Compatible with UTFT library
+
* With SD Card Socket
+
 
+
==Specifications==
+
{| border="1"
+
 
+
| PCB size||60.2mm X 50.8mm X 1.6mm
+
 
|-
 
|-
| Indicators||
+
| [[File:2.4 TFT LCD Touch Shield_05.jpg|400px|2.4 TFT LCD Touch Shield V2]] <br>
 +
| [[File:2.4 TFT LCD Touch Shield_03.jpg|400px|2.4 TFT LCD Touch Shield V1]]<br>
 
|-
 
|-
| Power supply||5V
+
| <div style="text-align: center">[[2.4 TFT LCD Touch Shield V2|2.4 TFT LCD Touch Shield V2(SKU:IM160418001)]]</div>
|-
+
| <div style="text-align: center">[[2.4 TFT LCD Touch Shield V1|2.4 TFT LCD Touch Shield V1(SKU:IM120417012)]]</div>
| Communication Protocol ||
+
|-
+
| RoSH||Yes
+
 
|}
 
|}
 +
<br clear="all">
  
==Electrical Characteristics==
+
==V2 Change List==
{| class="wikitable"
+
* The only difference between V2.0 and V1.0 is that the driver IC for V2.0 is ILI9341.
|-
+
| align="center" style="background:#f0f0f0;"|'''Parameter'''
+
| align="center" style="background:#f0f0f0;"|'''Min.'''
+
| align="center" style="background:#f0f0f0;"|'''Typical'''
+
| align="center" style="background:#f0f0f0;"|'''Max.'''
+
| align="center" style="background:#f0f0f0;"|'''Unit'''
+
|-
+
| Power voltage ||4.5||5||5.5||VDC
+
|-
+
| Input voltage VH ||3||||5.5||V
+
|-
+
| Input voltage VL||-0.3||0||0.5||V
+
|}
+
 
+
==Hardware==
+
http://imall.iteadstudio.com/media/wysiwyg/Products/ArduinoTFTShields/IM120417012_2.4eTFT_shield.jpg
+
 
+
Figure 1 Bottom View
+
 
+
+
Pin map of Arduino 2.4” TFT Touch [[Shield]]:
+
{| class="wikitable"
+
|-
+
| align="center" style="background:#f0f0f0;"|'''Arduino PIN'''
+
| align="center" style="background:#f0f0f0;"|'''Description'''
+
|-
+
| D0||DB8
+
|-
+
| D1||DB9
+
|-
+
| D2||DB10
+
|-
+
| D3||DB11
+
|-
+
| D4||DB12
+
|-
+
| D5||DB13
+
|-
+
| D6||DB14
+
|-
+
| D7||DB15
+
|-
+
| D8||Touch_Dout
+
|-
+
| D9||Touch_IRQ
+
|-
+
| D10||SD_CS
+
|-
+
| D11||SD_MOSI
+
|-
+
| D12||SD_MISO
+
|-
+
| D13||SD_SCK
+
|-
+
| A0||Touch_Din
+
|-
+
| A1||Touch_CLK
+
|-
+
| A2||-
+
|-
+
| A3||TFT_CS
+
|-
+
| A4||TFT_WR
+
|-
+
| A5||TFT_RS
+
|}
+
 
+
The Arduino 2.4“E TFT Touch [[shield]] uses the ILI9325D controller,it support 8bit
+
data interface. The touch IC is TSC2046.
+
 
+
==Operation voltage level setting switch==
+
When using the Arduino 2.4”E TFT Touch [[shield]] with 5V operation level
+
development board – like the Arduino UNO, Arduino MEGA and so on, set the
+
operation voltage level switch to 5V side.
+
 
+
When using the Arduino 2.4“E TFT Touch [[shield]] with 3.3V operation level
+
development board – like the [[Iteaduino BT]], leaf maple, chipKit UNO and so on,
+
set the operation voltage level switch to 3.3V side.
+
 
+
==Software==
+
This [[shield]] is compatible with UTFT library for Arduino, chipKit and their
+
compatible boards. You can down load the library here:
+
[http://www.rinkydinkelectronics.com/library.php?id=51 http://www.rinkydinkelectronics.com/library.php?id=51]
+
 
+
==Note==
+
Note: This shiled is 100% compatible with ITeaduino, Simplecortex. But not 100% compatible with Arduino UNO because of its big USB connecter socket.
+
 
+
http://imall.iteadstudio.com/media/wysiwyg/Products/ArduinoTFTShields/24ArduinoTFTTouchshield4.jpg
+
 
+
==Download==
+
[ftp://imall.iteadstudio.com/IM120417012_Arduino_2.4eTFT_shield/DS_S6D1121.pdf Datasheet for S6D1121]
+
 
+
[ftp://imall.iteadstudio.com/IM120417012_Arduino_2.4eTFT_shield/DS_IM120417012_2.4eTFTTouchshield.pdf Datasheet for 2.4 TFT LCD Touch shield]
+
 
+
[ftp://imall.iteadstudio.com/IM120417012_Arduino_2.4eTFT_shield/SCH_IM120417012_Arduino_2.4eTFT_shield.pdf Schematic for 2.4 TFT LCD Touch shield]
+
 
+
[ftp://imall.iteadstudio.com/IM120417012_Arduino_2.4eTFT_shield/DC_IM120417012_Arduino_2.4eTFT_shield.zip Demo Code for 2.4 TFT LCD Touch shield]
+
 
+
==Useful Links==
+

Latest revision as of 10:10, 29 June 2016

2.4 TFT LCD Touch Shield V2
2.4 TFT LCD Touch Shield V1


V2 Change List

  • The only difference between V2.0 and V1.0 is that the driver IC for V2.0 is ILI9341.