NoticeRASPBERRY PI 2.8 TFT ADD-ON
From ITEAD Wiki
Contents
Overview
Raspberry PI 2.8 TFT Add-on is customized for Raspberry Pi based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit ILI9323DS to control bus interface, which can display 263K colors. Module controls contents to be displayed via GPIO on Raspberry Pi. With touch function, it can be used to display the desktop of Raspberry Pi and realize clicking, touch and feedback.
Specifications
| PCB size | 72.0mm X 71mm X 1.6mm |
| Input voltage | 3.3V |
| Screen size | 2.8” |
| Resolution | 240x320 |
| Backlight | LED |
| Color | 262K |
| Driver chip | ILI9325DS |
Electrical characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Supply voltage | - | 3.3 | 3.6 | VDC |
| Current consumed (average) | - | 20 | 40 | mA |
| Input voltage VinH | 3 | 3.3 | 3.6 | V |
| Input voltage VinL | -0.3 | 0 | 0.5 | V |
| Output voltage VoutH | 3 | 3.3 | 3.6 | V |
| Output voltage VoutH | -0.3 | 0 | 0.5 | V |
Hardware
Pinmap
Raspberry PI interfaces
| Raspberry PI Pin N.O. | Pin name | Pin of 2.8 TFT |
| 11 | GPIO0 | DB10 |
| 12 | GPIO1 | DB11 |
| 13 | GPIO2 | DB12 |
| 15 | GPIO3 | DB13 |
| 16 | GPIO4 | DB14 |
| 18 | GPIO5 | DB15 |
| 22 | GPIO6 | DB16 |
| 7 | GPIO7 | DB17 |
| 3 | SDA0 | RS |
| 5 | SCL0 | WR |
| 24 | CE0 | CS |
| 26 | CE1 | RST |
| 19 | MOSI | TOUCH_CLK |
| 21 | MISO | TOUCH_CS |
| 23 | SCLK | TOUCH_DIN |
| 8 | TXD | TOUCH_DOUT |
| 10 | RXD | TOUCH_IRQ |
| 2 | +5V | - |
| 1 | +3.3V | 3.3V |
| 6 | GND | GND |
Download
Datasheet for RASPBERRY PI 2.8 TFT ADD-ON
Schematic for RASPBERRY PI 2.8 TFT ADD-ON
