W5100 Ethernet Network Module

Overview

It's a breakout board for W5100 embedded TCP/IP chip. Included on the board is an RJ-45 with X’FMR connector. It can be used as a component and little effort is required to interface to the W5100. This module is an ideal option for users who want a simple solution to adding TCP/IP capability to their project.

To make this module to work with SD card module, please read this blog: How to Make W5100 Module Work with SD Card Module?

Go shopping W5100 Ethernet Network Module (IM120525007)

Features

• Supports 10/100 Base TX
• Supports half/full duplex operation
• Supports auto-negotiation and auto cross-over detection
• IEEE 802.3/802.3u Compliance
• Operates 3.3V with 5V I/O signal tolerance
• Supports network status indicator LEDs
• Includes Hardware Internet protocols: TCP, IP Ver.4, UDP, ICMP, ARP, PPPoE, IGMP
• Includes Hardware Ethernet protocols: DLC, MAC
• Supports 4 independent connections simultaneously
• Supports MCU bus Interface and SPI Interface
• Supports Direct/Indirect mode bus access
• Supports Socket API for easy application programming
• Temperature : 0 ~ 70℃ (Operation), -40 ~ 85℃ (Storage)

Download

Datasheet for W5100

Schematic