Iteaduino ADK

From ITEAD Wiki
Revision as of 02:24, 24 November 2015 by ITead (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Overview

IteaduinoADK.jpg

Iteaduino ADK Main Board is based on Android Open Accessory Development Kit(ADK). Using this ADK Main Board you can build your own mobile accessories. Open Source Android development platform and Iteaduino ADK Main Board is an ideal solution for mobile based Home Automation.

Iteaduino ADK will make Android devices interact with the physical world. As an Arduino compatible platform with 256K Flash. On board USB host makes it easy to interact with USB devices like pen drivers, keyboard, mouse, Bluetooth dongles.

What is Android Open Accessory Development Kit?

The Android 3.1 platform (also backported to Android 2.3.4) introduces Android Open Accessory support, which allows external USB hardware (an Android USB accessory) to interact with an Android-powered device in a special "accessory" mode. When an Android-powered powered device is in accessory mode, the connected accessory acts as the USB host (powers the bus and enumerates devices) and the Android-powered device acts as the device.

Android USB accessories are specifically designed to attach to Android-powered devices and adhere to a simple protocol (Android accessory protocol) that allows them to detect Android-powered devices that support accessory mode. Accessories must also provide 500mA at 5V for charging power. Many previously released Android-powered devices are only capable of acting as a USB device and cannot initiate connections with external USB devices. Android Open Accessory support overcomes this limitation and allows you to build accessories that can interact with an assortment of Android-powered devices by allowing the accessory to initiate the connection.

Go shopping Iteaduino ADK (SKU:IM120411005)

Features

  • Android Open Accessories development Kit (ADK) compatible
  • Supports Android v2.3.4 and above devices
  • Works with Android Debug Bridge (ADB) using MicroBridge
  • Supports Android v1.5 and above devices
  • Arduino Mega 2560 compatible (256K Flash MCU)
  • Simply works like an Arduino Mega with an integrated USB Shield
  • 56 Digital IOs,16 Analog inputs,14 PWM outputs
  • 4 Hardware serial ports (UART),1 Hardware TWI (I2C),1 Hardware SPI (up to 8Mbps)
  • On board USB host(MAX3421)
  • On board USB slave(ATMega8U2) and ISP breakout
  • Build-in 5V-2A switched power regulator (input range 7V - 23V)

Spec

Microcontroller ATMega2560
Max Frequency 16MHz
RAM Capacity 8K
FLASH Capacity 256K
Power Supply External 12V/External 24V/External 7V/External 9V/USB 5V
I/O Operation Level 5V
Board Size 102mm x 54mm

Pin Mapping

Pin Number Pin Name Mapped Pin Name
1 PG5 ( OC0B ) Digital pin 4 (PWM)
2 PE0 ( RXD0/PCINT8 ) Digital pin 0 (RX0)
3 PE1 ( TXD0 ) Digital pin 1 (TX0)
4 PE2 ( XCK0/AIN0 )
5 PE3 ( OC3A/AIN1 ) Digital pin 5 (PWM)
6 PE4 ( OC3B/INT4 ) Digital pin 2 (PWM)
7 PE5 ( OC3C/INT5 ) Digital pin 3 (PWM)
8 PE6 ( T3/INT6 )
9 PE7 ( CLKO/ICP3/INT7 )
10 VCC VCC
11 GND GND
12 PH0 ( RXD2 ) Digital pin 17 (RX2)
13 PH1 ( TXD2 ) Digital pin 16 (TX2)
14 PH2 ( XCK2 )
15 PH3 ( OC4A ) Digital pin 6 (PWM)
16 PH4 ( OC4B ) Digital pin 7 (PWM)
17 PH5 ( OC4C ) Digital pin 8 (PWM)
18 PH6 ( OC2B ) Digital pin 9 (PWM)
19 PB0 ( SS/PCINT0 ) Digital pin 53 (SS)
20 PB1 ( SCK/PCINT1 ) Digital pin 52 (SCK)
21 PB2 ( MOSI/PCINT2 ) Digital pin 51 (MOSI)
22 PB3 ( MISO/PCINT3 ) Digital pin 50 (MISO)
23 PB4 ( OC2A/PCINT4 ) Digital pin 10 (PWM)
24 PB5 ( OC1A/PCINT5 ) Digital pin 11 (PWM)
25 PB6 ( OC1B/PCINT6 ) Digital pin 12 (PWM)
26 PB7 ( OC0A/OC1C/PCINT7 ) Digital pin 13 (PWM)
27 PH7 ( T4 )
28 PG3 ( TOSC2 )
29 PG4 ( TOSC1 )
30 RESET RESET
31 VCC VCC
32 GND GND
33 XTAL2 XTAL2
34 XTAL1 XTAL1
35 PL0 ( ICP4 ) Digital pin 49
36 PL1 ( ICP5 ) Digital pin 48
37 PL2 ( T5 ) Digital pin 47
38 PL3 ( OC5A ) Digital pin 46 (PWM)
39 PL4 ( OC5B ) Digital pin 45 (PWM)
40 PL5 ( OC5C ) Digital pin 44 (PWM)
41 PL6 Digital pin 43
42 PL7 Digital pin 42
43 PD0 ( SCL/INT0 ) Digital pin 21 (SCL)
44 PD1 ( SDA/INT1 ) Digital pin 20 (SDA)
45 PD2 ( RXDI/INT2 ) Digital pin 19 (RX1)
46 PD3 ( TXD1/INT3 ) Digital pin 18 (TX1)
47 PD4 ( ICP1 )
48 PD5 ( XCK1 )
49 PD6 ( T1 )
50 PD7 ( T0 ) Digital pin 38
51 PG0 ( WR ) Digital pin 41
52 PG1 ( RD ) Digital pin 40
53 PC0 ( A8 ) Digital pin 37
54 PC1 ( A9 ) Digital pin 36
55 PC2 ( A10 ) Digital pin 35
56 PC3 ( A11 ) Digital pin 34
57 PC4 ( A12 ) Digital pin 33
58 PC5 ( A13 ) Digital pin 32
59 PC6 ( A14 ) Digital pin 31
60 PC7 ( A15 ) Digital pin 30
61 VCC VCC
62 GND GND
63 PJ0 ( RXD3/PCINT9 ) Digital pin 15 (RX3)
64 PJ1 ( TXD3/PCINT10 ) Digital pin 14 (TX3)
65 PJ2 ( XCK3/PCINT11 )
66 PJ3 ( PCINT12 )
67 PJ4 ( PCINT13 )
68 PJ5 ( PCINT14 )
69 PJ6 ( PCINT 15 )
70 PG2 ( ALE ) Digital pin 39
71 PA7 ( AD7 ) Digital pin 29
72 PA6 ( AD6 ) Digital pin 28
73 PA5 ( AD5 ) Digital pin 27
74 PA4 ( AD4 ) Digital pin 26
75 PA3 ( AD3 ) Digital pin 25
76 PA2 ( AD2 ) Digital pin 24
77 PA1 ( AD1 ) Digital pin 23
78 PA0 ( AD0 ) Digital pin 22
79 PJ7
80 VCC VCC
81 GND GND
82 PK7 ( ADC15/PCINT23 ) Analog pin 15
83 PK6 ( ADC14/PCINT22 ) Analog pin 14
84 PK5 ( ADC13/PCINT21 ) Analog pin 13
85 PK4 ( ADC12/PCINT20 ) Analog pin 12
86 PK3 ( ADC11/PCINT19 ) Analog pin 11
87 PK2 ( ADC10/PCINT18 ) Analog pin 10
88 PK1 ( ADC9/PCINT17 ) Analog pin 9
89 PK0 ( ADC8/PCINT16 ) Analog pin 8
90 PF7 ( ADC7 ) Analog pin 7
91 PF6 ( ADC6 ) Analog pin 6
92 PF5 ( ADC5/TMS ) Analog pin 5
93 PF4 ( ADC4/TMK ) Analog pin 4
94 PF3 ( ADC3 ) Analog pin 3
95 PF2 ( ADC2 ) Analog pin 2
96 PF1 ( ADC1 ) Analog pin 1
97 PF0 ( ADC0 ) Analog pin 0
98 AREF Analog Reference
99 GND GND
100 AVCC VCC

PinMap2560big.png

Download

Schematic for Iteaduino ADK

Useful Link