NoticeIBoard Ex
From ITEAD Wiki
Contents
Overview
Iboard Ex is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, nRF24L01+ module interface, Micro SD socket and an ATMEGA32U4. This board will add wireless XBee control as well as internet connectivity to your projects. And don’t need any external programmer, just connect it with PC by a USB cable. It’s great for anything from home automation to robot control. The possibilities are endless!
Spec
| PCB size | 80.77mm X 57.66mm X 1.6mm |
| Power supply | 7-23V DC |
| Microprocessor | Atmega32u4 |
| Indicators | PWR, Tx, Rx, COL, FDX, SPD, LINK,TEST |
| Communication Interface | Ethernet RJ45,XBee,nRF24L01+,UART,IIC |
| RoHS | Yes |
Electrical Characteristics
| Specification | Min. | Typical Value | Max. | Unit |
|---|---|---|---|---|
| Power Voltage | 7 | - | 23 | VDC |
| Input Voltage VH (Target Voltage = 3.3V) | 3 | 3.3 | 3.6 | V |
| Input Voltage VL: | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 100 | 500 | mA |
Hardware
Pin Map
Software
Download
Useful Link
By michu <Make StripInvaders Cheaper: Use An IBoard>
Andy Karpov's GitHub Page <RF24 library that supports nRF24L01 on iBoard>
Andy Karpov's GitHub Page <RF24Network library that supports nRF24L01 on iBoard>
