Translations:ITDB02-2.2S/15/zh-cn

From ITEAD Wiki
Revision as of 02:47, 21 July 2014 by ITead (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

利用PWM引脚控制LEDA背光

  • 用arduino IDE打开0.1Basics\Fade的例子,烧写到UNO中去。
  • 然后按照以下的接线方式连接UNO和ITDB02-2.2S模块:
2.2S 引脚 UNO 引脚
VCC 5V
GND GND
LEDA D9
  • 插上电源后,可以看到屏幕的背光会由暗到亮,由亮到暗这样循环发光。

IM140714001in2.gif