Stackable SD Card shield V3.0

Overview

SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.

Go shopping Stackable SD Card shield V3.0 (IM120417007)

Basic features

• Arduino compatible
• Supports both SD card and TF card
• Stackable
• Compatible with 5V and 3.3V Arduino mainboards

Specifications

PCB size	56.15mm X56.23mm X 1.6mm
Operating voltage	3.3V/5V DC
Indicator	PWR
Communication interface	UART，IIC，SPI
Electronic brick interface	Grove 4pin

Electrical characteristics

Parameter	Min.	Typical	Max.	Unit
Supply voltage	3	-	5.5	VDC
Operating level	-	3.3/5	-	V
Consumption current	-	-	100	mA

Hardware