NoticeArduino Nano IO shield
From ITEAD Wiki
Contents
Overview
Nano IO shield is a breakout board designed for Arduino Nano. It breaks out all pins as Electronic brick 3pin interface, the XBee and nRF24L01 wireless interface. Also a 7-12V external power interface on board.
Features
- All digital and analog pins breakout
- XBee and nRF24L01+ module interface breakout
- External power supply current support
- Compatible pin map for electronic brick
Specifications
| PCB size | 74.4mm X 50.3mm X 1.6mm |
| Power supply | compatible with Arduino |
| RoSH | Yes |
Electrical Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power voltage | 7 | - | 12 | VDC |
| Input voltage VH | 3 | - | 5.5 | V |
| Input voltage VL | -0.3 | 0 | 5.5 | V |
Hardware
Figure 1 Top Map
| Arduino PIN | Digital IO | Analog In | XBee | nRF24L01+ | Comunication |
| D0 | D0 | - | Dout | - | Rx |
| D1 | D1 | - | Ding | - | Tx |
| D2 | D2 | - | - | IRQ | |
| D3 | D3 | - | - | - | |
| D4 | D4 | - | - | - | |
| D5 | D5 | - | - | - | |
| D6 | D6 | - | - | - | |
| D7 | D7 | - | - | - | |
| D8 | D8 | - | - | - | |
| D9 | D9 | - | - | CE | |
| D10 | D10 | - | - | CSn | |
| D11 | D11 | - | - | MOSI | |
| D12 | D12 | - | - | MISO | |
| D13 | D13 | - | - | SCK | |
| A0 | - | A0 | - | - | |
| A1 | - | A1 | - | - | |
| A2 | - | A2 | - | - | |
| A3 | - | A3 | - | - | |
| A4 | - | A4 | - | - | SDA |
| A5 | - | A5 | - | - | SCL |
| A6 | - | A6 | - | - | |
| A7 | - | A7 | - | - |
Download
Datasheet for Arduino Nano IO shield
Schematic for Arduino Nano IO shield
