Foca

Overview

Foca V2.0 is a USB to serial UART board with XBee interface socket. It’s the essential tools for establishing communication between PC and mostly MCU or use XBee. Especially, it’s the optimum tool for the board which basic Arduino but without USB interface, like Sniffer Nano, Colorduino and etc.

Features

• Single chip USB to asynchronous serial data transfer interface. Tiny

volume

• Entire USB protocol handled on the chip – No firmware programming

require

• 5V Single Supply Operation and compatible with 3.3V/5V operation

voltage.

• USB 2.0 Full Speed compatible
• Compatible with Xbee

Specifications

PCB size	45.72mm X 29.21mm X 1.6mm
Power supply	5V DC
Indicators	TX,RX,PWR
RoHS	Yes

Electrical Characteristics

Parameter	Min.	Typical	Max.	Unit
Power voltage	4.5	5	5.5	VDC
Input voltage VinH (Target Voltage = 3.3V )	3	3.3	3.6	V
Input voltage VinH (Target Voltage = 5V )	4.5	5	5.5	V
Input voltage VinL	-0.3	0	0.5	V
Current Consumption	-	20	40	mA

Hardware

Index	Name	Description
1	UART	Serial interface
2	ISP	Program with AVRDUDE
3	IO voltage Switch	Set the voltage of VCCIO
4	XBee socket	Socket for Xbee/XBee pro

Licence

Attribution Non-Commercial Share Alike

cc by-nc-sa

Download

Datasheet

Schematic