NoticeTranslate
Jump to: navigation, search
Translations:ITDB02-2.8/Page display title/zh-cn
ITDB02-2.8
You need translation rights to translate messages.Get permission
ITDB02-2.8 module is 2.8" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is ILI9325DS, it supports 8bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.
==Features==
* Compatible with 3.3/5V operation voltage level
* Compatible with UTFT library
* With SD Card Socket
| Driver IC||ILI9325
|-
| Backlight||4LEDs
|-
| Power supply||3.3V
|-
| Touch Panel||Y
|-
| Touch IC||XPT2046
|-
| Resolution||240*320
|-
| Size||75mm*50mm
|-
|}
==Electrical Characteristics==
{| class="wikitable"
|-
| align="center" style="background:#f0f0f0;"|'''Parameter'''
| align="center" style="background:#f0f0f0;"|'''Min.'''
| align="center" style="background:#f0f0f0;"|'''Typical'''
| align="center" style="background:#f0f0f0;"|'''Max.'''
| align="center" style="background:#f0f0f0;"|'''Unit'''
|-
| Power voltage||4.5||5||5.5||VDC
|-
| Input voltage VinH (Target Voltage = 3.3V)||3||3.3||3.6||V
|-
| Input voltage VinH (Target Voltage = 5V)||4.5||5||5.5||V
|-
| Input voltage VinL||-0.3||0||0.5||V
|-
| Current Consumption||-||20||40||mA
|}
==Hardware==
http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/IM120419009_ITDB02_2.8.jpg
[[File:ITDB02-2.8-parallel.jpg|400px]]
{| class="wikitable"
|-
| align="center" style="background:#f0f0f0;"|'''Pin'''
| align="center" style="background:#f0f0f0;"|'''Type*'''
| align="center" style="background:#f0f0f0;"|'''Description'''
|-
| GND||G||Ground
|-
| VCC||P||5V Power Supply pin
|-
| NC||-||No connection
|-
| RS||I||Data/Command selection
|-
| WR||I||Write signal enable, low active
|-
| RD||I||Read signal enable, low active
|-
| DB8||I||Data Bus
|-
| DB9||I||Data Bus
|-
| DB10||I||Data Bus
|-
| DB11||I||Data Bus
|-
| DB12||I||Data Bus
|-
| DB13||I||Data Bus
|-
| DB14||I||Data Bus
|-
| DB15||I||Data Bus
|-
| CS||I||Chip Selection，Low level active
|-
| NC||-||No connection
|-
| LED||P||Backlight
|-
| NC||-||No connection
|-
| DB0||-||No connection(8bit and 16bit mode)
|-
| DB1||-||No connection(8bit and 16bit mode)
|-
| DB2||-||No connection(8bit and 16bit mode)
|-
| DB3||-||No connection(8bit and 16bit mode)
|-
| DB4||-||No connection(8bit and 16bit mode)
|-
| DB5||-||No connection(8bit and 16bit mode)
|-
| DB6||-||No connection(8bit and 16bit mode)
|-
| DB7||-||No connection(8bit and 16bit mode)
|-
| T_CLK||I||Touch clock
|-
| T_CS||I||Touch chip selection
|-
| T_DIN||I||Touch data input
|-
| T_BUSY||O||Touch status
|-
| T_DOUT||O||Touch data output
|-
| T_IRQ||O||Touch interrupt
|-
| SD_SO||O||SD MISO
|-
| SD_SCK||I||SD SCK
|-
| SD_SI||I||SD MOSI
|-
| SD_NSS||I||SD NSS
|-
| NC||-||No connection
|-
| NC||-||No connection
|}
The ITDB02_2.8 uses the ILI9325DS controller , it support 8bit data interface. The touch IC is TSC2046.
==Download==
[ftp://imall.iteadstudio.com/IM120419009_ITDB02_2.8/DS_IM120419009_ITDB02_2.8.pdf Datasheet for ITDB02-2.8]
==Useful Links==
[http://henningkarlsen.com/electronics/library.php?id=51 by Henning Kalsen <UTFT Library>]
Loading messages...
0% translated, 0% reviewed
Retrieved from "https://wiki.iteadstudio.com/Special:Translate"
