RASPBERRY PI LCD1602 ADD-ON

Overview

Raspberry PI LCD1602 Add-on is customized for Raspberry Pi interfaces based on LCD1602 display module. With GPIO’s on Raspberry Pi, it can be used to control the contents to be displayed; with software, it can be used to control the backlight for on and off. Buttons on the module can be used to control cursor location on the screen. In addition, electronic brick interface can bring more expanded functions for the Raspberry Pi.

Go shopping RASPBERRY PI LCD1602 ADD-ON (IM131227002)

Specifications

PCB size	83.8mm X 68.6mm X 1.6mm
Input voltage	5V
Interface	Electronic brick interface
Contrast	Adjustable

Hardware

Pinmap

Raspberry PI Interfaces

Raspberry PI Pin N.O.	Pin name	Pin of LCD1602 Module	Description
11	GPIO0	D4	LCD1602 data cable
12	GPIO1	D5	LCD1602 data cable
13	GPIO2	D6	LCD1602 data cable
15	GPIO3	D7	LCD1602 data cable
16	GPIO4	RS	Register selection cable
18	GPIO5	E	Enable
22	GPIO6	BLK control	Backlight control pin(1)
7	GPIO7	-	Electronic brick interface
3	SDA0	-	Electronic brick interface
5	SCL0	-	Electronic brick interface
24	CE0	LEFT BUTTON	Button output pin(2)
26	CE1	UP BUTTON	Button output pin(2)
19	MOSI	DOWN BUTTON	Button output pin(2)
21	MISO	RIGHT BUTTON	Button output pin(2)
23	SCLK	SELECT BUTTON	Button output pin(2)
8	TXD	-	Electronic brick interface
10	RXD	-	Electronic brick interface
2	+5V	-
1	+3.3V	-
6	GND	-

(1)Backlight control pin: When GPIO6 outputs low level, backlight of LCD1602 is off.

(2)Button output pin: When the button is pressed down, it outputs low level; otherwise it outputs high level.

Contrast

• Contrast

Contrast of the screen can be adjusted by rotating the potentiometer.

Download

Datasheet for RASPBERRY PI LCD1602 ADD-ON

Schematic for RASPBERRY PI LCD1602 ADD-ON