NoticeStackable SD Card shield V3.0
From ITEAD Wiki
Contents
Overview
SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.
Go shopping Stackable SD Card shield V3.0 (IM120417007)
Basic features
- Arduino compatible
- Supports both SD card and TF card
- Stackable
- Compatible with 5V and 3.3V Arduino mainboards
Specifications
| PCB size | 56.15mm X56.23mm X 1.6mm |
| Operating voltage | 3.3V/5V DC |
| Indicator | PWR |
| Communication interface | UART，IIC，SPI |
| Electronic brick interface | Grove 4pin |
Electrical characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Supply voltage | 3 | - | 5.5 | VDC |
| Operating level | - | 3.3/5 | - | V |
| Consumption current | - | - | 100 | mA |
Hardware
Pinmap
| Index | Pin of Arduino | Pin of SD Shield |
| 1 | VCC | 5V/3V3 |
| 2 | GND | GND |
| 3 | D13/ICSP_SCK | SD_SCK |
| 4 | D12/ICSP_MISO | SD_OUT |
| 5 | D11/ICSP_MOSI | SD_IN |
| 6 | D4 | SD_CS |
| 7 | D0 | RX |
| 8 | D1 | TX |
| 9 | A4 | SDA |
| 10 | A5 | SCL |
