Tilt Sensor/Switch Brick

Overview

Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.

Features

1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.

2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.

Specifications

PCB size	24.0mm X 21.0mm X 1.6mm
Working voltage	3.3 or 5V DC
Operating voltage	3.3 or 5V DC
Compatible interfaces	2.54 3-pin interface and 4-pin Grove interface(1)

Electrical Characteristics

Parameter	Min.	Typical	Max.	Unit
Working voltage	3	5	5.5	VDC
Digital output voltage（VCC=5V）	0	-	5	V
Working current（VCC=5V）	-	450	-	uA