Arduino GPS shield

Overview

Arduino GPS shield is a GPS module breadout board designed for Global Positioning System receiver with SD interface. It is easy to use for recording the position data into SD card. 5V/3.3V compatible operation voltage level make it compatible with Arduino boards, leaf maple, IFlat32 and other arduino compatible boards.

Features

• With Micro SD interface
• Active antenna design with high receive sensitivity, compatible

normal antenna

• Extremely fast time to first fix at low signal level
• UART interface
• Operation temperature: -40℃ ~ +85℃

Specifications

PCB size	55.88mm X 54.1mm X 1.6mm
Indicators	PWR
Power supply	compatible with Arduino
Communication Protocol	UART
RoSH	Yes

Electrical Characteristics

Parameter	Min.	Typical	Max.	Unit
Power voltage	4.5	5	5.5	VDC
Input voltage VH	3		5.5	V
Input voltage VL	-0.3	0	0.5	V
Baud rate		38400		bps

Hardware

Figure 1 Top Map

Arduino PIN	Description
D0	Data
D1	Din
D2	-
D3	-
D4	-
D5	-
D6	-
D7	-
D8	-
D9	-
D10	CSN
D11	MOSI
D12	MISO
D13	SCK
A0	Breakout
A1	Breakout
A2	Breakout
A3	Breakout
A4	IIC_SDA
A5	IIC_SCL