Sonoff TH 10/16

Overview

Sonoff TH10/16 is a Sonoff version that can monitor and set temperature and humidity through the APP eWeLink. Just as the name indicats, the new version Sonoff TH device supports two power supply specifications: 10A or 16A. Sonoff TH 10/16 supports presetting range for temperature or humidity, when the temperature or humidity of the environment falls into the range, it will automatically turn on or turn off connected devices.

The device supports connecting to three kinds of temperature and humidity sensors (AM2301, DS18B20, DHT11). Actually, Sonoff TH 10A/16A Sonoff TH 10A/16A can work as a Sonoff when without connecting to a sensor. But compared to Sonoff, Sonoff 10/16 is more safer, less radiation and in bigger size, easy operation. Most importantly, with the support of latest ewelink app, you can create chains of simple conditional statements(Smart Scene). This means you can use them with temperature and humidity sensors (AM2301, DS18B20, DHT11) to collect temperature and humidity data, while these data can be used to trigger ON/OFF other smart devices(Sonoff, Sonoff RF, Sonoff SV, Slampher, smart socket, etc.) under your account. This device is perfect to work with electric fan, air conditioner, humidifier. Please note that this version does not have 433MHz RF function.

We are selling two kinds of sensors: AM2301 and DS18B20. We've customize an interface for Sonoff TH10/TH16 to easily connect with the sensor, just plug and play. Note that the sensor should be plug into Sonoff TH before you power it up, don't plug or unplug the sensor in power on status. AM2301 is non-waterproff, while DS18B20 can work in water.

Go shopping SonoffTH10/16(SKU:IM160712005)

Features

Supports 90 ~ 250V AC input
Support max 10A /16A input
Support fast configure SSID and password connection through APP
Support automatic connect to server, register and update status info.
Support tracking device status and timely remote control through APP
Support setting single and repeat timing tasks
Support real-time temperature and humidity displaying
Support 3 temperature and humidity sensors (AM2301, DS18B20, DHT11)
Support preset temperature and humidity range to turn on/off

WIFI Characteristics

• 802.11 b/g/n

• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS

• Built-in TCP/IP protocol stack

• Built-in TR switch, balun, LNA, power amplifier and matching network

• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power

• A-MPDU&A-MSDU aggregation and 0.4μs guard interval

• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode

• Support cloud OTA upgrade

• Support STA/AP/STA + AP mode

• Standby power consumption is less than 1.0 mW (DTIM3)

• Operating temperature range: -40 ℃ - 125 ℃

• Other parameters are as follows

Category	Parameters	Description
Wireless Parameter	Wireless standard	802.11 b/g/n
Wireless Parameter	Frequency range	2.4GHz-2.5GHz (2400M-2483.5M)
Hardware Parameter	Data port	UART/I2C
	Data port	GPIO/PWM
	Operating voltage	3.0~3.6V(recommend 3.3V)
	Operating current	Average： 80mA
	Operating temperature	-40°~125°
	Storage temperature	Room temperature
	PCBA size	89.1mm45.0mm1.2mm
Software Parameter	Wireless network mode	station/softAP/SoftAP+station
	Security mechanism	WPA/WPA2
	Encryption type	WEP/TKIP/AES
	Firmware upgration	Local serial programming/Cloud Upgrade/Host download programming
	Software development	Support secondary development
	Network protocols	IPv4, TCP/UDP/HTTP/FTP
	User configuration	cloud server, Android/iOS APP