Difference between revisions of "Stackable SD Card shield"
From ITEAD Wiki
(→Hardware) |
(→Software) |
||
Line 34: | Line 34: | ||
==Software== | ==Software== | ||
+ | There is a readymake library for Arduino SD card logger, this [[project]] focus in just one simple | ||
+ | functionality: logging data to a file in SD cards from Arduino boards. | ||
+ | [http://code.google.com/p/arduino-filelogger http://code.google.com/p/arduino-filelogger] |
Revision as of 09:02, 22 May 2014
Contents
Overview
This SD card shield has both standard SD card and TF card adapter, but you just can use one of them at the same time. There are some prototype holds for user to expand their circuit on the shield.
Basic features
- Arduino compatible
- Stand SD card and TF card compatible
- Prototype expand
- Arduino footprint expand
- Arduino Library support
Hardware
Pin of Arduino | With SD Card |
5V | VCC->3v3 |
GND | GND |
D13 | SD_CLK |
D12 | SD_OUT |
D11 | SD_IN |
D10 | SD_CS |
Software
There is a readymake library for Arduino SD card logger, this project focus in just one simple functionality: logging data to a file in SD cards from Arduino boards. http://code.google.com/p/arduino-filelogger