Difference between revisions of "RepRap Arduino Mega Pololu Shield"

Latest revision as of 08:52, 3 November 2014

Overview

This is the bare PCB of RepRap Arduino Mega Pololu Shield.

According to RepRap wiki about this shield. RepRap Arduino Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

Go shopping RepRap Arduino Mega Pololu Shield

Open Source Files

• Reference: http://reprap.org/wiki/Arduino_Mega_Pololu_Shield

Eagle Files

• Download it from here: http://reprap.org/wiki/File:ArduinoMegaPololuShield.zip

Eagle Libraries

• Download it from here: http://reprap.org/wiki/File:RepRapjr.lbr

Schematic

Current schematic shown. For older versions click the image. Click again for full resolution.