NoticeDifference between revisions of "Iteaduino Nano"
From ITEAD Wiki
(→Spec) |
(→Download) |
||
| Line 48: | Line 48: | ||
==Download== | ==Download== | ||
| + | [ftp://imall.iteadstudio.com/Mainboard/IM130615004_ITeaduino_Nano/DS_IM130615004_Iteaduino_Nano.pdf Datasheet for Iteaduino Nano] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Mainboard/IM130615004_ITeaduino_Nano/SCH_IM130615004_ITeaduino_Nano.pdf Schematic for Iteaduino Nano] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Mainboard/IM130615004_ITeaduino_Nano/DOC_Driver_Installation.pdf Driver Installation] | ||
| + | |||
| + | [ftp://imall.iteadstudio.com/Mainboard/IM130615004_ITeaduino_Nano/DRI_CP210x_VCP_Windows.zip Driver] | ||
==Useful Link== | ==Useful Link== | ||
Revision as of 08:03, 19 May 2014
Contents
Overview
Iteaduino Nano is a small, complete, and breadboard-friendly board based on the Arduino Nano 3.0. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Micro USB cable instead of a standard one.
Hardware
Spec
| Microcontroller | Atmega328 |
| Operating Voltage | 5V |
| POWER Supply Voltage(recommended) | 7~12V |
| Power supply Max Voltage | 12V |
| Digital IO pins | 20 |
| Analog Input pins(ADC) | 8 |
| DC Output current on per IO lines | 40mA |
| Flash Memory | 32 KB of which 2 KB used by boot loader |
| SRAM | 2 KB |
| EEPROM | 1KB |
| Clock frequency | 16 MHz |
| Dimension | 43.18X17.78X1.6mm |
