Difference between revisions of "Translations:ITDB02-2.4S/7/zh-cn"

From ITEAD Wiki
Jump to: navigation, search
(Created page with "==Pin Map== {| class="wikitable" |- | align="center" style="background:#f0f0f0;"|'''引脚''' | align="center" style="background:#f0f0f0;"|'''类型*''' | align="center" style...")
 
(No difference)

Latest revision as of 01:46, 9 August 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (ITDB02-2.4S)
==Pin Map==
{| class="wikitable"
|-
| align="center" style="background:#f0f0f0;"|'''Pin'''
| align="center" style="background:#f0f0f0;"|'''Type*'''
| align="center" style="background:#f0f0f0;"|'''Description'''
|-
| VCC||P||5V Power supply pin
|-
| GND||G||Ground
|-
| SCK||I||SPI SCK
|-
| MISO||O||SPI MISO
|-
| MOSI||I||SPI MOSI
|-
| CS||I||Chip Select for TFT
|-
| D/C||I||Command or parameter select
|-
| RST||I||RESET signal for TFT
|-
| LEDA*||I||Backlight control pin
|-
| SD_CS||I||Chip Select for SD
|-
| T_CS||I||Chip Select for touch function
|-
| T_IRQ||O||Interrupt output for touch
|-
|}
*Type: P--Power supply; G--Ground; I--Input; O--Output.
*LEDA: When LEDA is set as high electronic level, the backlight turns on. When it's set as low electronic level, the backlight turns off.
Translation==Pin Map==
{| class="wikitable"
|-
| align="center" style="background:#f0f0f0;"|'''引脚'''
| align="center" style="background:#f0f0f0;"|'''类型*'''
| align="center" style="background:#f0f0f0;"|'''描述'''
|-
| VCC||P||5V Power supply pin
|-
| GND||G||Ground
|-
| SCK||I||SPI SCK
|-
| MISO||O||SPI MISO
|-
| MOSI||I||SPI MOSI
|-
| CS||I||Chip Select for TFT
|-
| D/C||I||Command or parameter select
|-
| RST||I||RESET signal for TFT
|-
| LEDA*||I||Backlight control pin
|-
| SD_CS||I||Chip Select for SD
|-
| T_CS||I||Chip Select for touch function
|-
| T_IRQ||O||Interrupt output for touch
|-
|}
*类型: P:电源; G:地; I:输入; O:输出.
*LEDA: 当LEDA设置为高电平,背光会亮;当LEDA设置为低电平,背光会熄灭。

Pin Map

引脚 类型* 描述
VCC P 5V Power supply pin
GND G Ground
SCK I SPI SCK
MISO O SPI MISO
MOSI I SPI MOSI
CS I Chip Select for TFT
D/C I Command or parameter select
RST I RESET signal for TFT
LEDA* I Backlight control pin
SD_CS I Chip Select for SD
T_CS I Chip Select for touch function
T_IRQ O Interrupt output for touch
  • 类型: P:电源; G:地; I:输入; O:输出.
  • LEDA: 当LEDA设置为高电平,背光会亮;当LEDA设置为低电平,背光会熄灭。