NoticeDifference between revisions of "Iteaduino BT"
From ITEAD Wiki
(→Spec) |
(→Spec) |
||
| Line 17: | Line 17: | ||
==Spec== | ==Spec== | ||
| − | + | {| border="1" | |
| − | + | ||
| − | + | |- | |
| − | + | | Microcontroller | |
| − | + | | 10mm X 82mm X 1.6mm | |
| − | + | ||
| − | + | |- | |
| − | + | | PCB size | |
| + | | 72MHz | ||
| + | |- | ||
| + | | Indicators | ||
| + | | Power,TX,RX,D13,LED1,LED2 | ||
| + | |- | ||
| + | | Power supply(recommended) | ||
| + | | 7-23V DC | ||
| + | |- | ||
| + | | Power supply(limits) | ||
| + | | 23 VDC (max) | ||
| + | |- | ||
| + | | Communication Protocol | ||
| + | | UART,SPI,IIC | ||
| + | |- | ||
| + | | Clock Speed | ||
| + | | 16MHz | ||
| + | |- | ||
| + | | RoHS | ||
| + | | Yes | ||
| + | |} | ||
==Download== | ==Download== | ||
Revision as of 07:09, 19 May 2014
Overview
Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino UNO/Duemilanove, 100% compatible with its existing program and shields, but with the bluetooth wireless funcion. The power consumption is about 50% of the original Arduino boards.
Features
- Design for Bluetooth communication
- Compatible with Arduino UNO/Duemilanove pins, holes and dimensions
- Wide range external input from 7~23V DC
- Pins out for Sensor and Servo
- 3.3V/5V Operating Voltage selection
Hardware
Spec
| Microcontroller | 10mm X 82mm X 1.6mm |
| PCB size | 72MHz |
| Indicators | Power,TX,RX,D13,LED1,LED2 |
| Power supply(recommended) | 7-23V DC |
| Power supply(limits) | 23 VDC (max) |
| Communication Protocol | UART,SPI,IIC |
| Clock Speed | 16MHz |
| RoHS | Yes |
Download
Demo Code for Iteaduino BT Master Mode
Fritzing Parts for Iteaduino BT
Useful Link
<Correct Iteaduino BT Datasheet>
By Michael Doherty <Iteaduino BT Test Vedio>
By Benjamin Bellamy <How-To configure and use an Iteaduino BT>
