Revision as of 09:18, 17 July 2014
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (RASPBERRY PI OLED ADD-ON )
==Overview==
==Overview==
[[File:IM140714003_3.JPG|thumb|400px|right]]
There are seldom OLED add-ons customized for Raspberry Pi in the open source hardware market. In a lot of projects, we only need to display little information such as the state of system or IP. What’s more, when we have a high requirement for its portability, it’s unsuitable to connect a big screen to Raspberry Pi via HDMI interface. Thus, a tiny OLED add-on can satisfy this demand. Translation ==概述== 概述 市面上很少能找到为树莓派量身定制的OLED屏幕，/在很多应用项目中，我们仅需要显示非常简单的一些信息，比如系统状态、IP等信息，/或者对便携性有较高需求，这时候用HDMI去接一个大屏幕明显不合适，一个小巧的OLED屏幕刚好能满足这种需求。
OLED Add-on是为树莓派量身定制的，板载一块0.96" 128*64 OLED屏幕，控制芯片为SSD1306，每一个像素点都可以通过SSD1306独立控制点亮或者关闭。
我们不仅仅只是提供一块可以方便的插在树莓派上面的板子，还为其配套提供了SDK，移植了Arduino上的驱动程序。安装完SDK后，就可以像在Arduino平台底下一样，非常轻松的驱动这块板子。
Notice
