NoticeDifference between revisions of "ITDB02-1.8SP"
From ITEAD Wiki
(→Useful Links) |
|||
| Line 73: | Line 73: | ||
==Useful Links== | ==Useful Links== | ||
[http://henningkarlsen.com/electronics/library.php?id=51 by Henning Karlsen <UTFT Library>] | [http://henningkarlsen.com/electronics/library.php?id=51 by Henning Karlsen <UTFT Library>] | ||
| + | [http://blog.iteadstudio.com/instruction-for-iteadstudio-tft-module/ Instruction for ITEAD studio TFT Module] | ||
Revision as of 08:50, 26 June 2014
Overview
ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The display interface is serial, so it just need 5 wires (CS,RS,SCL,SDA,RST) for controlling. The controller of this LCD module is ST7735.
ITDB02-1.8SP is supported by UTFT Library.
Go shopping ITDB02-1.8SP (IM120419001)
Specifications
| Driver IC | ST7735B |
| Backlight | 4LEDs |
| Power supply | 5/3.3V DC |
| Touch Panel | N |
| Touch IC | / |
| Resolution | 128*160 |
| Size | 50mm * 36mm |
Hardware
Bottom View
| Pin | Type* | Description |
| VIN | P | 5V Power Supply pin |
| GND | G | Ground |
| RST | I | Reset，Low level active |
| RS | I | Data/Command selection |
| SDA | I | Serial data input |
| SCL | I | Serial clock input |
| CS | I | Chip Selection，Low level active |
| VDD33 | P | 3.3V Power Supply pin |
Type*：P: Power supply; G:Ground; I:Input; O:Output; The ITDB02_1.8SP uses the ST7735 controller
Download
Useful Links
by Henning Karlsen <UTFT Library> Instruction for ITEAD studio TFT Module
