NoticeDifference between revisions of "Stackable SD Card shield V3.0"
From ITEAD Wiki
(Created page with "==Overview== right SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V...") |
(→Overview) |
||
| Line 3: | Line 3: | ||
[[File:Stakable SD Card shield V3.0.jpg|thumb|400px|right]] | [[File:Stakable SD Card shield V3.0.jpg|thumb|400px|right]] | ||
SD [[Shield]] 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo. | SD [[Shield]] 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo. | ||
| − | |||
| − | |||
Go shopping [http://imall.iteadstudio.com/im120417007.html Stackable SD Card shield V3.0 (IM120417007)] | Go shopping [http://imall.iteadstudio.com/im120417007.html Stackable SD Card shield V3.0 (IM120417007)] | ||
Revision as of 07:58, 20 June 2014
Contents
Overview
SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.
Go shopping Stackable SD Card shield V3.0 (IM120417007)
Basic features
- Arduino compatible
- Supports both SD card and TF card
- Stackable
- Compatible with 5V and 3.3V Arduino mainboards
Specifications
Electrical characteristics
Hardware
