NoticeDifference between revisions of "Iteaduino Tiny"
(→Software) |
|||
| Line 4: | Line 4: | ||
Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient. | Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient. | ||
| + | Go shopping [http://imall.iteadstudio.com/im130615003.html Iteaduino Tiny (SKU:IM130615003)] | ||
==Features== | ==Features== | ||
* Support for the Arduino IDE 1.0+ (Windows) | * Support for the Arduino IDE 1.0+ (Windows) | ||
| Line 78: | Line 79: | ||
==Software== | ==Software== | ||
| − | Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, download the modified Arduino IDE offered by Digispart in the following address: | + | Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, [[download]] the modified Arduino IDE offered by Digispart in the following address: |
[http://sourceforge.net/projects/digistump/files/ http://sourceforge.net/projects/digistump/files/]. | [http://sourceforge.net/projects/digistump/files/ http://sourceforge.net/projects/digistump/files/]. | ||
| Line 99: | Line 100: | ||
[[File:IteaduinoTiny4.jpg]] | [[File:IteaduinoTiny4.jpg]] | ||
| − | Because there is no reset pin on Tinny85, before pressing the "upload" button to download codes onto Iteaduino Tiny, you | + | Because there is no reset pin on Tinny85, before pressing the "upload" button to [[download]] codes onto Iteaduino Tiny, you |
need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button, | need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button, | ||
| − | after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will download the | + | after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will [[download]] the |
compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny. | compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny. | ||
Revision as of 03:59, 11 June 2014
Overview
Iteaduino Tiny is a mini development board based on Attiny85-20 master, which is cheap, compact and easy to use with low power consumption. The mainboard is a derivative board with reference to digispark design, and it supports use of specific Arduino IDE and uses Arduino syntax for programming which is quite convenient.
Go shopping Iteaduino Tiny (SKU:IM130615003)
Features
- Support for the Arduino IDE 1.0+ (Windows)
- Power via USB
- Built-in USB
- 4 I/O Pins
- 8k Flash Memory (about 6k after bootloader)
- I2C and SPI (vis USI)
- PWM on 3 pins (more possible with Software PWM)
- ADC on 4 pins
- Power LED and Test/Status LED
Spec
| Microcontroller | ATtiny85-20 |
| Operating Voltage | 5V |
| Digital IO pins | PB0, PB1, PB2, PB5 |
| Analog Input pins(ADC) | PB2 |
| Indicator | D1(PB1), PWR |
| DC Output current on per IO lines | 40mA |
| Flash Memory | 8 KB of which 2 KB used by bootloader |
| SRAM | 512B |
| EEPROM | 512B |
| Clock frequency | 16 MHz |
| Dimension | 24.89X12.7X1.6mm |
Hardware
Pin Map
| ISP Pin | Index of Digital Pin | Name of Attiny85 |
| MISO | D1 | PB1 |
| VCC | - | - |
| SCK | D2 | PB2 |
| MOSI | D0 | PB0 |
| RST# | D5 | PB5 |
| GND | - | - |
Software
Let’s take Windows7 operating system as an example, before we use Iteaduino Tiny, we need to install driver for it. First, download the modified Arduino IDE offered by Digispart in the following address: http://sourceforge.net/projects/digistump/files/.
We included Digispart USB driver files in the document, so we can execute the driver file (DigisparkArduino-Win32DigisparkWindowsDriverInstallDriver.exe)to install the driver in the system. Keep clicking "Next" till installation of the USB device is completed.
When Iteaduino Tiny is connected to a computer via USB at the first time, the system will find the new device and display installing Digispart bootloader,
Next, you can run DigisparkArduino-Win32Digispark-Arduino-1.0.4arduino.exe, open the modified Arduino IDE, where we can write and compile our codes. During downloading, you need to select the board type, browse and select Tool> Board> Digispark (Tiny Core) in sequence. Then choose Tools> programmer> Digispark.
Because there is no reset pin on Tinny85, before pressing the "upload" button to download codes onto Iteaduino Tiny, you need to unplug the USB cable on Iteaduino Tiny first to disconnect the USB connection. Then, press the "upload" button, after ‘Plug in device now…’ is displayed on IDE window, reconnect the USB cable, and then IDE will download the compiled data onto Iteaduino Tiny. For details about operating procedures, please refer to user manual for Iteaduino Tiny.
