NoticeDifference between revisions of "Iteaduino UNO"
From ITEAD Wiki
(→Hardware) |
(→Spec) |
||
| Line 17: | Line 17: | ||
==Spec== | ==Spec== | ||
| − | + | * Microprocessor: ATmega328,ATmega8U2 | |
| + | * PCB size: 68.58mm X 58.42mm X 1.6mm | ||
| + | * Indicators: Power,TX,RX,D13 | ||
| + | * Power supply(recommended): 7-23V DC | ||
| + | * Power supply(limits): 23 VDC (max) | ||
| + | * Communication Protocol: UART,SPI,IIC | ||
| + | * Clock Speed: 16MHz | ||
==Download== | ==Download== | ||
Revision as of 03:32, 19 May 2014
Overview
Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Features
New external IO pin map
Efficient DC-DC Power supply with wide range input
3.3V/5V Operating Voltage selection
All pins out for Sensor and Servo
UART/IIC interface breakout
Hardware
Spec
- Microprocessor: ATmega328,ATmega8U2
- PCB size: 68.58mm X 58.42mm X 1.6mm
- Indicators: Power,TX,RX,D13
- Power supply(recommended): 7-23V DC
- Power supply(limits): 23 VDC (max)
- Communication Protocol: UART,SPI,IIC
- Clock Speed: 16MHz
Download
Fritzing Parts for Iteaduino UNO
