Difference between revisions of "ITDB02-5.0"

From ITEAD Wiki
Jump to: navigation, search
m (Overview)
m (Overview)
 
Line 2: Line 2:
 
[[File:IM120419008_3.jpg|thumb|400px|right]]
 
[[File:IM120419008_3.jpg|thumb|400px|right]]
  
ITDB02-5.0 module is 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16 bit data interface with 4 wires control interface. Moreover, this module contains the touch screen and SD card socket.
+
ITDB02-5.0 display module is a 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of four wires. Moreover, this module contains the touch screen and SD card socket.
  
 
ITDB02-5.0 is supported by UTFT Library.
 
ITDB02-5.0 is supported by UTFT Library.

Latest revision as of 06:31, 12 January 2017

Overview

IM120419008 3.jpg

ITDB02-5.0 display module is a 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of four wires. Moreover, this module contains the touch screen and SD card socket.

ITDB02-5.0 is supported by UTFT Library.

Go shopping ITDB02-5.0 (IM120419008)

Specifications

Driver IC SSD1963
Backlight
Power supply 3.3V
Touch Panel Y
Touch IC XPT2046
Resolution 800*480
Size 90mm*115mm

Hardware

IM120419008pic1.jpg IM120419008pic2.jpg IM120419008pic3.jpg

Pin Map

Pin Type* Description
GND G Ground
VCC P 5V Power Supply pin
NC - No connection
RS I Data/Command selection
WR I Write signal enable, low active
RD I Read signal enable, low active
DB8 I Data Bus
DB9 I Data Bus
DB10 I Data Bus
DB11 I Data Bus
DB12 I Data Bus
DB13 I Data Bus
DB14 I Data Bus
DB15 I Data Bus
CS I Chip Selection,Low level active
NC - No connection
RST I Reset Pin
NC - No connection
LED P Backlight(3.3V)
NC - No connection
DB0 I Data Bus
DB1 I Data Bus
DB2 I Data Bus
DB3 I Data Bus
DB4 I Data Bus
DB5 I Data Bus
DB6 I Data Bus
DB7 I Data Bus
T_CLK I Touch clock
T_CS I Touch chip selection
T_DIN I Touch data input
T_BUSY O Touch status
T_DOUT O Touch data output
T_IRQ O Touch interrupt
SD_SO O SD MISO
SD_SCK I SD SCK
SD_SI I SD MOSI
SD_NSS I SD NSS
NC - No connection
NC - No connection

Download

Schematic--File:IM120419008-ITDB02-5_0-schematic.pdf

Useful Links

by Henning Karlsen <UTFT library>