NoticeDifference between revisions of "Iteaduino MEGA 2560"
From ITEAD Wiki
(→Electrical Characteristics) |
(→Hardware) |
||
| Line 58: | Line 58: | ||
==Hardware== | ==Hardware== | ||
http://imall.iteadstudio.com/media/wysiwyg/Products/IM120410003_IteaduinoMEGA2560/IM120410003_IteaduinoMEGA2560.jpg | http://imall.iteadstudio.com/media/wysiwyg/Products/IM120410003_IteaduinoMEGA2560/IM120410003_IteaduinoMEGA2560.jpg | ||
| + | |||
| + | Top view | ||
==Pin map== | ==Pin map== | ||
Revision as of 07:45, 20 May 2014
Contents
Overview
Iteaduino MEGA2560 is a derivative version of the Arduino MEGA 2560. It’s designed is basing on Arduino MEGA, 100% compatible to its existing program and Arduino shields, but the smaller size, lower power consumption and with much practical improvement. In addition, it has all ATMega2560 pins breakout, which more 16 pins than Arduino MEGA 2560. Note: It does not support all the Mega shields because of the size.
Features
- Arduino shields compatible
- 3.3V / 5V operation level
- Wide range power supply and low power consumtion
- Small size , but all ATMega2560 pins breakout
Spec
| Microprocessor | Atmega2560 |
| PCB Size | 59mm X 77mm X 1.6mm |
| Indicators | Power,D13,Tx,Rx |
| Power supply(recommended) | 6-23V DC |
| Power supply(limits) | 23 VDC(max) |
| Communication Protocol | UART,SPI,IIC |
| Clock Speed | 16MHz |
| RoHS | Yes |
Electrical Characteristics
| Specification | Min | Type | Max | Unit |
| Input voltage | 6.5 | - | 23 | VDC |
| Operating Voltage | - | 3.3/5 | - | VDC |
| DC Current per I/O Pin | - | 15 | - | mA |
Hardware
Top view
Pin map
Download
Datasheet for Iteaduino MEGA 2560
Schematic for Iteaduino MEGA 2560
Fritzing Parts for Iteaduino MEGA 2560
Useful Link
By butch <Solution for Itead mega 2560 not recognized by USB>
by Garry <Iteaduino MEGA 2560 + GPS shield to make a logger>
