NoticeDifference between revisions of "Ibridge V2.0"
From ITEAD Wiki
(Created page with "==Introduction== IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface.You can plug it on Arduino boards directly, and you can get the small development pl...") |
m (→==) |
||
| Line 10: | Line 10: | ||
| Operation Level||Digital 5/3.3V DC | | Operation Level||Digital 5/3.3V DC | ||
|} | |} | ||
| − | ==== | + | ==Electrical Characteristics== |
| + | {| class="wikitable" | ||
| + | |- | ||
| + | | align="center" style="background:#f0f0f0;"|'''Parameter''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Min.''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Typical''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Max.''' | ||
| + | | align="center" style="background:#f0f0f0;"|'''Unit''' | ||
| + | |- | ||
| + | | Power supply||4.5||5||5.5||VDC | ||
| + | |- | ||
| + | | Input voltage VinH(Target voltage=3.3V)||3||3.3||3.6||V | ||
| + | |- | ||
| + | | Input voltage VinH(Target voltage=5V)||4.5||5||5.5||V | ||
| + | |- | ||
| + | | Input voltage VinL||-0.3||0||0.5||V | ||
| + | |- | ||
| + | | Current Consumption||-||20||40||mA | ||
| + | |} | ||
| + | |||
==== | ==== | ||
==== | ==== | ||
Revision as of 10:06, 11 September 2015
Contents
Introduction
IBridge is a 4X4 key-pad shield with a 5110 Graphic LCD interface.You can plug it on Arduino boards directly, and you can get the small development platform with keypad input and Graphic LCD display.
Specification
| PCB size | 68.6mm X 53.3mm X 1.6mm |
| Power supply | 5V |
| Operation Level | Digital 5/3.3V DC |
Electrical Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power supply | 4.5 | 5 | 5.5 | VDC |
| Input voltage VinH(Target voltage=3.3V) | 3 | 3.3 | 3.6 | V |
| Input voltage VinH(Target voltage=5V) | 4.5 | 5 | 5.5 | V |
| Input voltage VinL | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 20 | 40 | mA |
