Difference between revisions of "Nextion Editor Quick Start Guide"

Revision as of 02:27, 27 August 2015

Introduction

Nextion Editor is a development software used for visual building of graphic interface for embedded GUI-intensive devices with various types of TFT displays and Touch Panels. Using this tool you can start creating TFT based devices much faster and easier.

In the future, Nextion Editor will provide a set of examples intended to speed up your work and creation process. Examples are fully-comented and explained, thus allowing a quick start in designing user interface. Browse through the given examples and learn how to create GUI application with minimum of time and effort.

Example learning download.--File:example.zip

Menu and Tool Bars

Main Interface

• 1: Main Menu
• 2. Image Library：Import the image resource you need in project. 
• 3. Font Library: Storage the font you made by font editor.
• 4. Working area
• 5. Page editing: Add or select page in this area  
• 6. Attributes editing：Edit the attributes of components and pages. Like the value, color of a text components.
• 7. Warning prompt window: if errors occur, they will be shown in this area.
• 8. Event editing: Write some simple code here. When the event is triggered, the code you write will be run. Like sending out some command to UART when release a button component.

Main Menu

File

You can open/import/save projects by clicking File.

Tool

There are two tools: Font Generate & Eyedropper

Font Generate

When you start a project, Font generating is the foremost thing you need to do. Only by doing this step can you input characters in Text component. For now, the English Font format that Nextion Editor only supports is Arial. Please choose this Font only when you generate English font. Save the generated font in the zi folder.

Eyedropper Tool

Actually, it is a color decimal converter. When you pick a color in this tool, it will tell you the color's decimal code. This will be helpful, if you use commands to do GUI editing.

Open, New, Save

These three buttons for you open, add a new, or save project.

Compile

It is used for refresh project, not gonna save project. If you modify some attributes of a certain component, you need to click it so that your modifications can take effect.

Debug

Click it, there will be a simulator pop-up window. You can test the project you've done or input codes to know whether your project is going right or not.

Download

This button is for you downloading the project into Nextion TFT board.

Add Component

So far, there are text, button, progress bar, picture, crop, gauges, hotspot, waveform, slider, timer, variable components available. More about these components editing guide, please see the following sections.

Delete Component

You can choose Delete All Components or Delete Selected Components.

Copy & Paste

Only used for copy or paste any component!

Resolution

Used for changing your whole project's resolution. Please note that, create a project's resolution according to your Nextion TFT boards resolution.

ID

Click ID to choose whether to show the components' IDs or not.

XY

Click XY to choose whether to show the XY coordinate or not.

Image Library

You can import the pictures in this panel by clicking Add button. Note that, every picture has its own ID number, if you insert or delete any picture, the ID number will change. But replacing picture will not change the ID number.

Font Library

Font library is very important! If you want to use different font size or patterns in your projects, you need to generate different fonts and add them in the font library panel.

(So far, font pattern only supports Arial)

Click here to know how to generate a font.

For example, using 16 and 40 pounds font size in a project, you need to generate two fonts, one is 16 pounds, and the other is 40 pounds.

In the font library panel, every font has its ID number, delete any one will change its Font ID number.

Then, what's the ID number for? When you editing the text attributes, there is a font option. The value you can input in font option is the Font ID number.

Page editing

You can add, insert, delete, and copy a page by using the bottom buttons. Double-click a page, you can define a name for a page, press enter key to save the change. Note that, only press enter key can save your defined name for a page.

Working area

You can drag-and-drop any component in the working area. Support three background patterns: no background, solid color, and Image.

Components

So far, there are eleven components available in Nextion editor. We will introduce their features one by one. Note that, only attributes in green color are available to use commands to edit.And the one in bold is the main attribute that is refreshed automatically

For example: We debug t0 with command"t0.txt="changetxt"", we will see the change at once, but if we want to change the text color with command"t0.pco=65535", we can't see the change, so we have to add a command "ref t0", then it works.

• Nextion Editor is not perfect, is improving now. We are welcome any suggestions, don't hesitate to judge us in our forum!

Text

Text component is for user inputting characters. Click each attribute, its meaning will be shown on the bottom.

In sta attribute, you can choose different background pattern: crop image, solid color, and Image. Generally, crop image is for creating transparent background.

Button

Compare to text component, Button has a press event attribute, which means you can fill different color or effect for a button when it is being pressed.

• Button Attribute set

Button being pressed before	Button being pressed

Progress Bar

Progress Bar doesn't has many attributes, and you can create a horizontal progress bar or vertical progress bar.

Picture

Picture can be add to your project through picture components

• Picture component Attributes set

Crop

Crop component can crop a full-screen image, and show the cropped image directly on your page.

Gauges

The sta attribute in Gauges component has two options: crop image and solid color. Use these two option to give your Gauges a beautiful background.

Hotspot

Hotspot is a blank area when you editing it. However, when you debug it, it will be transparent. This component is for collecting touch coordinates, which means the touch spot coordinate in the touch area will be collected and recorded.

Editing mode	Debugging mode

Waveform

Slider

Timer

Variable

Debug, online simulator

Using debug function for your project, you can examine whether your project is working well or not. You also can use some codes to realize the simulative effects.

When you click debug, there is a pop-up window to show you the simulator interface.

In this window, you will see some other panels like User Code, Simulator Output, returned data from Nextion TFT boards.

• Send command to

There are three options for you: "send command to serial port", "send command to serial port", and "send command to both simulator and serial port". Do remember that you should click "connected" to connect the Nextion TFT when you use "send command to serial port" and send command to both simulator and serial port" options.

• User code panel

In this panel, you can use the command to debug your project. The commands are listed on our wiki, please click here to view.

• Simulator Output

When you debug your project, input some commands in User code panel, the Simulator will return some data to respond the execution of commands. The respond data are in binary format, please click here to know what the respond data mean.

• Data returned from serial devices

This panel take effect when you choose "send command to serial port" or "send command to both simulator and serial port".

When you do some operation on Nextion TFT boards, this panel will show the respond data in binary format, please click here to know what the respond data mean.

• Download current resource file to device

After you debug your project, you can click "download current resource file to device", it's very convenient. When download, choose your Nextion serial COM, and keep the default boundrate.

Download Source file from SD card

Open the bin folder in two ways:

1.Open Nextion Editor→File→Build Folder

2. Open the computer path like this: Open Computer→Local Disk(C:)→User→User's Computer(User's Computer name)→AppData→Roaming→Nextion Editor→bianyi,you will see the project file in tft format.

Note: When you use SD card to install your project file in Nextion TFT, only this format could work. Copy the tft file to SD card，then insert SD card to the SD card slot,power up Nextion, the project installation will be automatically proceeded. Note that store only one tft file in the SD card to avoiding the installation error, and the resolution of tft file must be in accord with the resolution of your Nextion TFT.

Nextion Editor IDE

Download the latest Nextion Editor

Working with Nextion Editor

Learn more tutorials

Managing Project

Quick start HMI Example

Download the Nextion HMI boot examples