Difference between revisions of "ITDB02-5.0"
From ITEAD Wiki
m (→Useful Links) |
m (→Pin Map) |
||
Line 69: | Line 69: | ||
|- | |- | ||
| CS||I||Chip Selection,Low level active | | CS||I||Chip Selection,Low level active | ||
+ | |- | ||
+ | | NC||-||No connection | ||
+ | |- | ||
+ | | RST||I||Reset Pin | ||
|- | |- | ||
| NC||-||No connection | | NC||-||No connection |
Revision as of 09:09, 12 April 2016
Overview
ITDB02-5.0 module is 5.0" TFT LCD with 65K color 800 x 480 resolutions. The controller of this LCD module is SSD1963, it supports 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.
ITDB02-5.0 is supported by UTFT Library.
Go shopping ITDB02-5.0 (IM120419008)
Specifications
Driver IC | SSD1963 |
Backlight | |
Power supply | 3.3V |
Touch Panel | Y |
Touch IC | XPT2046 |
Resolution | 800*480 |
Size | 90mm*115mm |
Hardware
Pin Map
Pin | Type* | Description |
GND | G | Ground |
VCC | P | 5V Power Supply pin |
NC | - | No connection |
RS | I | Data/Command selection |
WR | I | Write signal enable, low active |
RD | I | Read signal enable, low active |
DB8 | I | Data Bus |
DB9 | I | Data Bus |
DB10 | I | Data Bus |
DB11 | I | Data Bus |
DB12 | I | Data Bus |
DB13 | I | Data Bus |
DB14 | I | Data Bus |
DB15 | I | Data Bus |
CS | I | Chip Selection,Low level active |
NC | - | No connection |
RST | I | Reset Pin |
NC | - | No connection |
LED | P | Backlight(3.3V) |
NC | - | No connection |
DB0 | I | Data Bus |
DB1 | I | Data Bus |
DB2 | I | Data Bus |
DB3 | I | Data Bus |
DB4 | I | Data Bus |
DB5 | I | Data Bus |
DB6 | I | Data Bus |
DB7 | I | Data Bus |
T_CLK | I | Touch clock |
T_CS | I | Touch chip selection |
T_DIN | I | Touch data input |
T_BUSY | O | Touch status |
T_DOUT | O | Touch data output |
T_IRQ | O | Touch interrupt |
SD_SO | O | SD MISO |
SD_SCK | I | SD SCK |
SD_SI | I | SD MOSI |
SD_NSS | I | SD NSS |
NC | - | No connection |
NC | - | No connection |
Download
Schematic--File:IM120419008-ITDB02-5_0-schematic.pdf