NoticeDifference between revisions of "Gboard"
(→Electrical Characteristics) |
|||
| Line 27: | Line 27: | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
| + | {| class="wikitable" | ||
| + | |- | ||
| + | ! Specification !! Min.!! Typical Value !! Max.!! Unit | ||
| + | |- | ||
| + | | Power Voltage || 6 || - || 23 || VDC | ||
| + | |- | ||
| + | | Input Voltage VH (Target Voltage = 3.3V) || 3 || 3.3 || 3.6 || V | ||
| + | |- | ||
| + | | Input Voltage VL: || -0.3 || 0 || 0.5 || V | ||
| + | |- | ||
| + | | Current Consumption || - || 100 || 500 || mA | ||
| + | |} | ||
==Hardware== | ==Hardware== | ||
Revision as of 02:29, 20 May 2014
Contents
Overview
Gboard is a unique Arduino board which features a SIM900 GSM/GPRS module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board will add wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!
Gboard can be used as a GSM/GPRS data transfer or wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack.
Spec
| PCB size | 88.1mm X 60.7mm X 1.6mm |
| Power supply | 6-20V DC |
| Microprocessor | Atmega328 |
| Indicators | PWR, Status, NET |
| RoHS | Yes |
Electrical Characteristics
| Specification | Min. | Typical Value | Max. | Unit |
|---|---|---|---|---|
| Power Voltage | 6 | - | 23 | VDC |
| Input Voltage VH (Target Voltage = 3.3V) | 3 | 3.3 | 3.6 | V |
| Input Voltage VL: | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 100 | 500 | mA |
Hardware
Top View Map
Gboard can be used as a GSM/GPRS data transfer or wireless communication project development platform. Gboard support wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Gboard can be powered by a mini USB, power Jack.
UART Setting Jumpers
Power and reset connection of SIM900
Software
Download
Useful Link
Jason Garland's GitHub Page <GBoard Library for Arduino 1.x>
