Difference between revisions of "Iteaduino UNO"

From ITEAD Wiki
Jump to: navigation, search
(Hardware)
Line 43: Line 43:
 
==Hardware==
 
==Hardware==
 
[[File:IteadunoUNO1.jpg]]
 
[[File:IteadunoUNO1.jpg]]
 +
 
Digital/Servo Interface: D0~D13 pin  
 
Digital/Servo Interface: D0~D13 pin  
 +
 
Sensor Interface: A0 A1 A2 A3 A4 A5 pin
 
Sensor Interface: A0 A1 A2 A3 A4 A5 pin
  

Revision as of 01:11, 20 May 2014

Overview

Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Features

  • New external IO pin map
  • Efficient DC-DC Power supply with wide range input
  • 3.3V/5V Operating Voltage selection
  • All pins out for Sensor and Servo
  • UART/IIC interface breakout

Spec

Microprocessor ATmega328,ATmega8U2
PCB size 68.58mm X 58.42mm X 1.6mm
Indicators Power,TX,RX,D13
Power supply(recommended) 7-23V DC
Power supply(limits) 23 VDC (max)
Communication Protocol UART,SPI,IIC
Clock Speed 16MHz

Electrical Characteristics

Hardware

IteadunoUNO1.jpg

Digital/Servo Interface: D0~D13 pin

Sensor Interface: A0 A1 A2 A3 A4 A5 pin

Pin Map

Power

Memory

Input and Output

Communication

Programming

Automatic (Software) Reset

USB Over-current Protection

Links and References

Download

Datasheet for Iteaduino UNO

Schematic for Iteaduino UNO

Fritzing Parts for Iteaduino UNO

Useful Link

<Fritzing Parts: ITEAD Development Board>