NoticeDifference between revisions of "Mini Rboard/en"
From ITEAD Wiki
(Created page with "Mini RBoard是一款带继电器的Arduino兼容板，除了带有一个继电器外，还有nRF24L01接口、433M RF Receiver接口， 可用于无线控制...") |
m |
||
| Line 4: | Line 4: | ||
{| border="1" | {| border="1" | ||
| − | | PCB | + | | PCB 尺寸||37.34mm X 49mm X 1.6mm |
|- | |- | ||
| − | | | + | | 电源||5V DC |
|- | |- | ||
| − | | | + | | 微处理器||Atmega328P |
|- | |- | ||
| − | | | + | | 指示灯||PWR |
|- | |- | ||
| − | | | + | | 接口||FOCA,nRF24l01+,J05E 433Mhz module socket |
|- | |- | ||
|} | |} | ||
Revision as of 03:14, 7 July 2014
Mini RBoard是一款带继电器的Arduino兼容板，除了带有一个继电器外，还有nRF24L01接口、433M RF Receiver接口， 可用于无线控制开关。而且它的体积很小，可以安装到某些排插中，做成智能插座开关。
Specification
| PCB 尺寸 | 37.34mm X 49mm X 1.6mm |
| 电源 | 5V DC |
| 微处理器 | Atmega328P |
| 指示灯 | PWR |
| 接口 | FOCA,nRF24l01+,J05E 433Mhz module socket |
Electrical Characteristics
| Parameter | Min. | Typical | Max. | Unit |
| Power supply | 4.5 | 5 | 5.5 | VDC |
| Input voltage VinH | 3 | 3.3 | 3.6 | V |
| Input voltage VinL | -0.3 | 0 | 0.5 | V |
| Current Consumption | 40 | 100 | Ma |
Hardware
Pin Map
| Pin | Description |
|---|---|
| 5V | 5V Power supply pin |
| GND | Ground |
| DTR | FOCA DTR |
| TXD | D1 |
| RXD | D0 |
| nRF24L01_CE | D9 |
| nRF24L01_CS | D10 |
| nRF24L01_CS | D11 |
| nRF24L01_MI | D12 |
| nRF24L01_MI | D13 |
| nRF24L01_IRQ | D2 |
| 433Mhz_DATA | D3 |
| A0 | A0(pulled up with 10K) |
| Relay_control* | D4 |
