NoticeDifference between revisions of "ITDB02-1.8SP"
From ITEAD Wiki
(Marked this version for translation) |
m |
||
| Line 4: | Line 4: | ||
<!--T:2--> | <!--T:2--> | ||
[[File:ITBD02-1.8SP.jpg|thumb|400px|right]] | [[File:ITBD02-1.8SP.jpg|thumb|400px|right]] | ||
| − | ITBD02-1.8SP is a 1.8" TFT LCD module with | + | ITBD02-1.8SP is a 1.8" TFT LCD module with 65K colors 128 x 160 resolutions. |
The display interface is serial, so it just need 5 wires (CS,RS,SCL,SDA,RST) for | The display interface is serial, so it just need 5 wires (CS,RS,SCL,SDA,RST) for | ||
controlling. The controller of this LCD module is ST7735. | controlling. The controller of this LCD module is ST7735. | ||
Revision as of 08:16, 4 August 2014
Overview
ITBD02-1.8SP is a 1.8" TFT LCD module with 65K colors 128 x 160 resolutions. The display interface is serial, so it just need 5 wires (CS,RS,SCL,SDA,RST) for controlling. The controller of this LCD module is ST7735.
ITDB02-1.8SP is supported by UTFT Library.
Go shopping ITDB02-1.8SP (IM120419001)
Specifications
| Driver IC | ST7735B |
| Backlight | 4LEDs |
| Power supply | 5/3.3V DC |
| Touch Panel | N |
| Touch IC | / |
| Resolution | 128*160 |
| Size | 50mm * 36mm |
Hardware
| Pin | Type* | Description |
| VIN | P | 5V Power Supply pin |
| GND | G | Ground |
| RST | I | Reset，Low level active |
| RS | I | Data/Command selection |
| SDA | I | Serial data input |
| SCL | I | Serial clock input |
| CS | I | Chip Selection，Low level active |
| VDD33 | P | 3.3V Power Supply pin |
Type*：P: Power supply; G:Ground; I:Input; O:Output;
