Difference between revisions of "ITDB02-1.8SP"
From ITEAD Wiki
(→Useful Links) |
(→Useful Links) |
||
Line 73: | Line 73: | ||
==Useful Links== | ==Useful Links== | ||
[http://henningkarlsen.com/electronics/library.php?id=51 by Henning Karlsen <UTFT Library>] | [http://henningkarlsen.com/electronics/library.php?id=51 by Henning Karlsen <UTFT Library>] | ||
+ | |||
[http://blog.iteadstudio.com/instruction-for-iteadstudio-tft-module/ Instruction for ITEAD studio TFT Module] | [http://blog.iteadstudio.com/instruction-for-iteadstudio-tft-module/ Instruction for ITEAD studio TFT Module] |
Revision as of 01:14, 27 June 2014
Overview
ITBD02-1.8SP is a 1.8" TFT LCD module with 262K colors 128 x 160 resolutions. The display interface is serial, so it just need 5 wires (CS,RS,SCL,SDA,RST) for controlling. The controller of this LCD module is ST7735.
ITDB02-1.8SP is supported by UTFT Library.
Go shopping ITDB02-1.8SP (IM120419001)
Specifications
Driver IC | ST7735B |
Backlight | 4LEDs |
Power supply | 5/3.3V DC |
Touch Panel | N |
Touch IC | / |
Resolution | 128*160 |
Size | 50mm * 36mm |
Hardware
Bottom View
Pin | Type* | Description |
VIN | P | 5V Power Supply pin |
GND | G | Ground |
RST | I | Reset,Low level active |
RS | I | Data/Command selection |
SDA | I | Serial data input |
SCL | I | Serial clock input |
CS | I | Chip Selection,Low level active |
VDD33 | P | 3.3V Power Supply pin |
Type*:P: Power supply; G:Ground; I:Input; O:Output; The ITDB02_1.8SP uses the ST7735 controller