Difference between revisions of "Stackable SD Card shield V3.0"

From ITEAD Wiki
Jump to: navigation, search
(→‎Electrical characteristics)
(→‎Hardware)
Line 45: Line 45:
 
[[File:Stakable SD Card shield V3.0-1.jpg]]
 
[[File:Stakable SD Card shield V3.0-1.jpg]]
  
 +
==Pinmap==
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Index'''
 +
| align="center" style="background:#f0f0f0;"|'''Pin of Arduino'''
 +
| align="center" style="background:#f0f0f0;"|'''Pin of SD [[Shield]]'''
 +
|-
 +
| 1||VCC||5V/3V3
 +
|-
 +
| 2||GND||GND
 +
|-
 +
| 3||D13/ICSP_SCK||SD_SCK
 +
|-
 +
| 4||D12/ICSP_MISO||SD_OUT
 +
|-
 +
| 5||D11/ICSP_MOSI||SD_IN
 +
|-
 +
| 6||D4||SD_CS
 +
|-
 +
| 7||D0||RX
 +
|-
 +
| 8||D1||TX
 +
|-
 +
| 9||A4||SDA
 +
|-
 +
| 10||A5||SCL
 +
|}
  
 
==Compatibility==
 
==Compatibility==

Revision as of 08:02, 20 June 2014

Overview

Stakable SD Card shield V3.0.jpg

SD Shield 3.0 is a break out board for standard SD and TF card. It is compatible with 5V and 3.3V Arduino mainboards, Arduino-compatible boards and Arduino mainboards that SPI is on ICSP instead on pin D11~13 such as Leonardo.

Go shopping Stackable SD Card shield V3.0 (IM120417007)

Basic features

  • Arduino compatible
  • Supports both SD card and TF card
  • Stackable
  • Compatible with 5V and 3.3V Arduino mainboards

Specifications

PCB size 56.15mm X56.23mm X 1.6mm
Operating voltage 3.3V/5V DC
Indicator PWR
Communication interface UART，IIC，SPI
Electronic brick interface Grove 4pin

Electrical characteristics

Parameter Min. Typical Max. Unit
Supply voltage 3 - 5.5 VDC
Operating level - 3.3/5 - V
Consumption current - - 100 mA

Hardware

Stakable SD Card shield V3.0-1.jpg

Pinmap

Index Pin of Arduino Pin of SD Shield
1 VCC 5V/3V3
2 GND GND
3 D13/ICSP_SCK SD_SCK
4 D12/ICSP_MISO SD_OUT
5 D11/ICSP_MOSI SD_IN
6 D4 SD_CS
7 D0 RX
8 D1 TX
9 A4 SDA
10 A5 SCL

Compatibility

Download

Useful Links

Retrieved from "https://wiki.iteadstudio.com/index.php?title=Stackable_SD_Card_shield_V3.0&oldid=1844"