NoticeDifference between revisions of "Wireless Charging Module"
From ITEAD Wiki
(→Demo) |
(→Download) |
||
| Line 32: | Line 32: | ||
|} | |} | ||
| − | == | + | ==Useful Links== |
| + | [http://blog.iteadstudio.com/wireless-charging-module-power-transmission-demo/ <Wireless Charging Module Power Transmission DEMO>] | ||
| + | |||
| + | [http://blog.iteadstudio.com/wireless-charging-module-review/ <Wireless Charging Module Review>] | ||
Revision as of 08:29, 28 May 2014
Overview
The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insulation coil, it could serve as a replacement for the Wireless Power Supply with stable 5/9/12V output voltage and maximum 600mA output current. Its small size and insulation coil is more suitable for using in wireless project.
Features
- Stable power supply
- Insulation Coil
- Space-saving design
Specifications
| Input Voltage | 12Vdc |
| Input Voltage(limits) | 13.5Vdc |
| Output Voltage | 5/9/12Vdc |
| Output Current(maximum) | 600mA |
| Transmitter Coil Inductance | 30uH |
| Transmit-receive distance | 1-20mm |
| Transmitter | 17*12*4mm |
| Receiver | 24*10*3mm |
| Coil Diameter | 38mm |
| Coil Height | 2mm |
