Difference between revisions of "ITDB02-2.4E"

From ITEAD Wiki
Jump to: navigation, search
(→‎Electrical Characteristics)
(→‎Hardware)
Line 41: Line 41:
  
 
==Hardware==
 
==Hardware==
 +
http://imall.iteadstudio.com/media/wysiwyg/Products/TFTLCDs/IM120419004_ITDB02_2.4E.jpg
 +
 +
Bottom View
 +
 +
Pin Map list
 +
 +
{| class="wikitable"
 +
|-
 +
| align="center" style="background:#f0f0f0;"|'''Pin'''
 +
| align="center" style="background:#f0f0f0;"|'''Type*'''
 +
| align="center" style="background:#f0f0f0;"|'''Description'''
 +
|-
 +
| GND||G||Ground
 +
|-
 +
| VCC||P||5V Power Supply pin
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| RS||I||Data/Command selection
 +
|-
 +
| WR||I||Write signal enable, low active
 +
|-
 +
| RD||I||Read signal enable, low active
 +
|-
 +
| DB8||I||Data Bus
 +
|-
 +
| DB9||I||Data Bus
 +
|-
 +
| DB10||I||Data Bus
 +
|-
 +
| DB11||I||Data Bus
 +
|-
 +
| DB12||I||Data Bus
 +
|-
 +
| DB13||I||Data Bus
 +
|-
 +
| DB14||I||Data Bus
 +
|-
 +
| DB15||I||Data Bus
 +
|-
 +
| CS||I||Chip Selection，Low level active
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| LED||P||Backlight
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| DB0||-||No connection(8bit mode)
 +
|-
 +
| DB0||I||Data Bus(16bit mode)
 +
|-
 +
| DB1||-||No connection(8bit mode)
 +
|-
 +
| DB1||I||Data Bus(16bit mode)
 +
|-
 +
| DB2||-||No connection(8bit mode)
 +
|-
 +
| DB2||I||Data Bus(16bit mode)
 +
|-
 +
| DB3||-||No connection(8bit mode)
 +
|-
 +
| DB3||I||Data Bus(16bit mode)
 +
|-
 +
| DB4||-||No connection(8bit mode)
 +
|-
 +
| DB4||I||Data Bus(16bit mode)
 +
|-
 +
| DB5||-||No connection(8bit mode)
 +
|-
 +
| DB5||I||Data Bus(16bit mode)
 +
|-
 +
| DB6||-||No connection(8bit mode)
 +
|-
 +
| ||I||Data Bus(16bit mode)
 +
|-
 +
| DB7||-||No connection(8bit mode)
 +
|-
 +
| ||I||Data Bus(16bit mode)
 +
|-
 +
| T_CLK||I||Touch clock
 +
|-
 +
| T_CS||I||Touch chip selection
 +
|-
 +
| T_DIN||I||Touch data input
 +
|-
 +
| T_BUSY||O||Touch status
 +
|-
 +
| T_DOUT||O||Touch data output
 +
|-
 +
| T_IRQ||O||Touch interrupt
 +
|-
 +
| SD_SO||O||SD MISO
 +
|-
 +
| SD_SCK||I||SD SCK
 +
|-
 +
| SD_SI||I||SD MOSI
 +
|-
 +
| SD_NSS||I||SD NSS
 +
|-
 +
| NC||-||No connection
 +
|-
 +
| NC||-||No connection
 +
|}
 +
 +
Type *：P: Power supply; G:Ground; I:Input; O:Output;
 +
 +
The ITDB02_2.4E uses the S6D1121 controller , it support 8/16bit data interface. The touch IC is TSC2046.
  
 
==Installation==
 
==Installation==

Revision as of 03:45, 28 May 2014

Overview

ITDB02-2.4E.jpg

ITDB02-2.4E module is 2.4" TFT LCD with 65K color 320 x 240 resolutions. The controller of this LCD module is S6D1121, it supports 8bit / 16bit data interface with 4 wires control interface. Moreover, this module includes the touch screen and SD card socket.

Features

  • Compatible with 3.3/5V operation voltage level
  • 8bits/16bits operation compatible
  • Compatible with UTFT library
  • With SD Card Socket

Specifications

PCB size 65.53mm X 50.8mm X 1.6mm
Power supply 5V DC
RoHS Yes

Electrical Characteristics

Parameter Min. Typical Max. Unit
Power voltage 4.5 5 5.5 VDC
Input voltage VinH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input voltage VinH (Target Voltage = 5V) 4.5 5 5.5 V
Input voltage VinL -0.3 0 0.5 V
Current Consumption - 20 40 mA

Hardware

IM120419004_ITDB02_2.4E.jpg

Bottom View

Pin Map list

Pin Type* Description
GND G Ground
VCC P 5V Power Supply pin
NC - No connection
RS I Data/Command selection
WR I Write signal enable, low active
RD I Read signal enable, low active
DB8 I Data Bus
DB9 I Data Bus
DB10 I Data Bus
DB11 I Data Bus
DB12 I Data Bus
DB13 I Data Bus
DB14 I Data Bus
DB15 I Data Bus
CS I Chip Selection，Low level active
NC - No connection
LED P Backlight
NC - No connection
DB0 - No connection(8bit mode)
DB0 I Data Bus(16bit mode)
DB1 - No connection(8bit mode)
DB1 I Data Bus(16bit mode)
DB2 - No connection(8bit mode)
DB2 I Data Bus(16bit mode)
DB3 - No connection(8bit mode)
DB3 I Data Bus(16bit mode)
DB4 - No connection(8bit mode)
DB4 I Data Bus(16bit mode)
DB5 - No connection(8bit mode)
DB5 I Data Bus(16bit mode)
DB6 - No connection(8bit mode)
I Data Bus(16bit mode)
DB7 - No connection(8bit mode)
I Data Bus(16bit mode)
T_CLK I Touch clock
T_CS I Touch chip selection
T_DIN I Touch data input
T_BUSY O Touch status
T_DOUT O Touch data output
T_IRQ O Touch interrupt
SD_SO O SD MISO
SD_SCK I SD SCK
SD_SI I SD MOSI
SD_NSS I SD NSS
NC - No connection
NC - No connection

Type *：P: Power supply; G:Ground; I:Input; O:Output;

The ITDB02_2.4E uses the S6D1121 controller , it support 8/16bit data interface. The touch IC is TSC2046.

Installation

Download

Useful Links

Retrieved from "https://wiki.iteadstudio.com/index.php?title=ITDB02-2.4E&oldid=1293"