|
|
| (3 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | ==Overview==
| + | {| class="FCK__ShowTableBorders" align="left" |
| − | | + | |
| − | [[File:W5100 Ethernet shield.jpg|thumb|400px|right]]
| + | |
| − | W5100 Ethernet [[shield]] is a WIZnet W5100 breakout board with POE and Micro-SD designed for Arduino platform. 5V/3.3V compatible operation voltage level makes it compatible with Arduino boards, leafmaple, and other Arduino compatible boards except Mega boards.
| + | |
| − | | + | |
| − | Go shopping [http://imall.iteadstudio.com/w5100-ethernet-shield.html W5100 Ethernet Shield (IM120911007)]
| + | |
| − | | + | |
| − | ==Features==
| + | |
| − | * With Micro SD interface
| + | |
| − | * 5V/3.3V double operational voltage level
| + | |
| − | * 10Mb/100Mb Ethernet socket with POE
| + | |
| − | * All electronic brick interface are broken out
| + | |
| − | * Operation temperature: -40℃ ~ +85℃
| + | |
| − | | + | |
| − | ==Specifications==
| + | |
| − | {| border="1" | + | |
| − | | + | |
| − | | PCB size||55.88mm X 68.58mm X 1.6mm
| + | |
| | |- | | |- |
| − | | Indicators||TX,RX,COL,FEX,SPD,LNK | + | | [[File:IM151104001 (5).jpg|350px|W5100 Ethernet Shield V1.1]] <br> |
| | + | | [[File:W5100 Ethernet shield.jpg|400px|W5100 Ethernet Shield V1.0]]<br> |
| | |- | | |- |
| − | | Power supply||5V | + | | <div style="text-align: center">[[W5100 Ethernet Shield V1.1|W5100 Ethernet Shield V1.1(SKU:IM151104001)]]</div> |
| − | |-
| + | | <div style="text-align: center">[[W5100 Ethernet Shield V1.0|W5100 Ethernet Shield V1.0(SKU:IM120911007)]]</div> |
| − | | Communication Protocol||SPI | + | |
| − | |- | + | |
| − | | RoSH||Yes
| + | |
| | |} | | |} |
| | + | <br clear="all"> |
| | | | |
| − | ==Electrical Characteristics== | + | ==V1.1 Change List== |
| − | {| class="wikitable"
| + | * V1.1 has one ICSP socket added, which will be compatible with more boards. |
| − | |-
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Specification'''
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Min'''
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Type'''
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Max'''
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Unit'''
| + | |
| − | |-
| + | |
| − | | Power Voltage||3V||-||5.5||VDC
| + | |
| − | |-
| + | |
| − | | Input Voltage VH:||3||-||5.5||V
| + | |
| − | |-
| + | |
| − | | Input Voltage VL:||-0.3||0||0.5||V
| + | |
| − | |-
| + | |
| − | | Current Consumption||-||-||100||mA
| + | |
| − | |}
| + | |
| − | | + | |
| − | ==Hardware==
| + | |
| − | http://imall.iteadstudio.com/media/wysiwyg/Products/IM120417003_IEshield/W5100Ethernetshield.jpg
| + | |
| − | | + | |
| − | {| class="wikitable"
| + | |
| − | |-
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Arduino PIN'''
| + | |
| − | | align="center" style="background:#f0f0f0;"|'''Description'''
| + | |
| − | |-
| + | |
| − | | D0||Rx/Breakout
| + | |
| − | |-
| + | |
| − | | D1||TX/Breakout
| + | |
| − | |-
| + | |
| − | | D2||Breakout
| + | |
| − | |-
| + | |
| − | | D3||Breakout
| + | |
| − | |-
| + | |
| − | | D4||SD_CS
| + | |
| − | |-
| + | |
| − | | D5||Breakout
| + | |
| − | |-
| + | |
| − | | D6||Breakout
| + | |
| − | |-
| + | |
| − | | D7||Breakout
| + | |
| − | |-
| + | |
| − | | D8||Breakout
| + | |
| − | |-
| + | |
| − | | D9||W5100_Reset
| + | |
| − | |-
| + | |
| − | | D10||W5100_CS
| + | |
| − | |-
| + | |
| − | | D11||MOSI
| + | |
| − | |-
| + | |
| − | | D12||MISO
| + | |
| − | |-
| + | |
| − | | D13||SCK
| + | |
| − | |-
| + | |
| − | | A0||Breakout
| + | |
| − | |-
| + | |
| − | | A1||Breakout
| + | |
| − | |-
| + | |
| − | | A2||Breakout
| + | |
| − | |-
| + | |
| − | | A3||Breakout
| + | |
| − | |-
| + | |
| − | | A4||IIC_SDA/Breakout
| + | |
| − | |-
| + | |
| − | | A5||IIC_SCL/Breakout
| + | |
| − | |}
| + | |
| − | | + | |
| − | ==Installation==
| + | |
| − | When install W5100 Ethernet [[shield]] to Iteaduino, please check the
| + | |
| − | operation voltage level of development board. If the voltage is 3.3V
| + | |
| − | (IFLAT32,Leafmaple), set the Operation Level Setting switch to 3.3V.
| + | |
| − | If the voltage is 5V(Arduino), set the Operation Level Setting switch to
| + | |
| − | 5V.
| + | |
| − |
| + | |
| − | Iteaduino communicates with both the W5100 and SD card using the
| + | |
| − | SPI bus. This is on digital pins 11, 12, and 13 on the
| + | |
| − | UNO/Duemilanove and pins 50, 51, and 52 on the Mega. On both
| + | |
| − | boards, pin 10 is used to select the W5100 and pin 4 for the SD card.
| + | |
| − | These pins cannot be used for general I/O. On the Mega, the hardware
| + | |
| − | SS pin, 53, is not used to select either the W5100 or the SD card, but
| + | |
| − | it must be kept as an output.
| + | |
| − | | + | |
| − | Note that because the W5100 and SD card share the SPI bus, only one
| + | |
| − | can be active at a time. If you are using both peripherals in your
| + | |
| − | program, this should be taken care of by the corresponding libraries.
| + | |
| − | If you're not using one of the peripherals in your program, however,
| + | |
| − | you'll need to explicitly deselect it. To do this with the SD card, set pin
| + | |
| − | 4 as an output and write a high to it. For the W5100, set digital pin 10
| + | |
| − | as a high output.
| + | |
| − | | + | |
| − | ==Indicator LED==
| + | |
| − | The [[shield]] contains a number of informational LEDs:
| + | |
| − | | + | |
| − | * LNK: indicates the presence of a network link and flashes when the
| + | |
| − | [[shield]] transmits or receives data
| + | |
| − | * FEX: indicates that the network connection is full duplex
| + | |
| − | * SPD: indicates the presence of a 100 Mb/s network connection (as
| + | |
| − | opposed to 10 Mb/s)
| + | |
| − | * RX: flashes when the [[shield]] receives data
| + | |
| − | * TX: flashes when the [[shield]] sends data
| + | |
| − | * COL: flashes when network collisions are detected
| + | |
| − | | + | |
| − | ==Download==
| + | |
| − | [ftp://imall.iteadstudio.com/Shield/IM120911007/DS_IM120911007_W5100_Ethernet_Shield.pdf Datasheet for W5100 Ethernet Shield]
| + | |
| − | | + | |
| − | [ftp://imall.iteadstudio.com/Shield/IM120911007/SCH_IM120911007_W5100_Ethernet_Shield.pdf Schematic for W5100 Ethernet Shield]
| + | |
| − | | + | |
| − | ==Useful Links==
| + | |
| − | 【From Phillip Stevens】
| + | |
| − | | + | |
| − | Prepared an integrated W5500 / W5200 / W5100 code here.
| + | |
| − | *One socket.h/.c interface.
| + | |
| − | *Based on freeRTOS for AVR (Arduino).
| + | |
| − | | + | |
| − | *freeRTOS/lib_iinchip
| + | |
| − | *freeRTOS/lib_inet
| + | |
| − | | + | |
| − | *https://sourceforge.net/projects/avrfreertos/
| + | |
Notice.jpg)
