NoticeDifference between revisions of "IBoard"
m (→Download) |
|||
| (11 intermediate revisions by 3 users not shown) | |||
| Line 6: | Line 6: | ||
Iboard can be used as an Ethernet, wireless communication [[project]] development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter. | Iboard can be used as an Ethernet, wireless communication [[project]] development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter. | ||
| − | The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE. | + | The board requires FTDI basic board to upload sketch, you can use our [[Foca]] board to do it. Iboard can be powered by a mini USB , power Jack or POE. |
| + | |||
| + | The onboard POE is pseudo POE, because the pin 4, 5, 7, 8 in 100M network cable is not being used. So we only use POE to power Ibaord. If you want to use the network cable to power, you can buy [https://www.itead.cc/passive-power-over-ethernet-cable-injector.html injector] here. | ||
| + | Or you can use DC7-23V to power. | ||
| + | |||
| + | Go shopping [http://imall.iteadstudio.com/im120410001.html IBoard (SKU:IM120410001)] | ||
==Spec== | ==Spec== | ||
| Line 16: | Line 21: | ||
|- | |- | ||
| Power supply | | Power supply | ||
| − | | 6- | + | | 6-23V DC |
|- | |- | ||
| Microprocessor | | Microprocessor | ||
| Line 29: | Line 34: | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
| − | + | {| class="wikitable" | |
| + | |- | ||
| + | ! Specification !! Min.!! Typical Value !! Max.!! Unit | ||
| + | |- | ||
| + | | Power Voltage || 6 || - || 23 || VDC | ||
| + | |- | ||
| + | | Input Voltage VH (Target Voltage = 3.3V) || 3 || 3.3 || 3.6 || V | ||
| + | |- | ||
| + | | Input Voltage VL: || -0.3 || 0 || 0.5 || V | ||
| + | |- | ||
| + | | Current Consumption || - || 100 || 500 || mA | ||
| + | |} | ||
==Hardware== | ==Hardware== | ||
| Line 39: | Line 55: | ||
and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. | and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. | ||
| − | The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB, power Jack or POE. | + | The board requires FTDI basic board to upload sketch, you can use our [[Foca]] board to do it. Iboard can be powered by a mini USB, power Jack or POE. |
==Software== | ==Software== | ||
| + | Iboard is designed for compatible for SD and Wiznet libraries of Arduino, and all demo codes could be downloaded directly here: | ||
| + | [http://www.ladyada.net/learn/arduino/ethfiles.html http://www.ladyada.net/learn/arduino/ethfiles.html] | ||
| + | |||
| + | With embedded bootloader, Iboard is easy to use by Arduino IDE through [[Foca]] series. ISP of Atmega328 is broke out for [[download]] firmware easily. | ||
==Download== | ==Download== | ||
| − | |||
| − | [ | + | [[:File:DS_IM120410001_iBoard.pdf |Datasheet for iBoard]] |
| − | [ | + | [[:File:DC_IM120410001_iBoard.zip |Demo Code for iBoard]] |
| − | [ | + | [[:File:SCH_IM120410001_iBoard.pdf |Schematic for iBoard]] |
| + | |||
| + | [[:File:Fri_IM120410001_IBoard.zip |Fritzing Parts for iBoard]] | ||
==Useful Link== | ==Useful Link== | ||
| − | [http://neophob.com/2012/06/make-stripinvaders-cheaper-use-an-iboard/ By michu <Make StripInvaders Cheaper: Use An IBoard>] | + | *[http://neophob.com/2012/06/make-stripinvaders-cheaper-use-an-iboard/ By michu <Make StripInvaders Cheaper: Use An IBoard>] |
| + | |||
| + | *[https://github.com/andykarpov/iBoardRF24 Andy Karpov's GitHub Page <RF24 library that supports nRF24L01 on iBoard>] | ||
| + | |||
| + | *[https://github.com/andykarpov/iBoardRF24Network Andy Karpov's GitHub Page <RF24Network library that supports nRF24L01 on iBoard>] | ||
| + | |||
| + | *[http://arduino.cc/forum/index.php/topic,110400.msg829190.html#msg829190 By NI$HANT <IBoard not able to access A6 and A7>] | ||
| + | |||
| + | *[http://blog.iteadstudio.com/btbee-pro-wireless-program-tutorials/ <BTBee Pro Wireless Program Tutorials>] | ||
| − | [ | + | *[http://blog.iteadstudio.com/fritzing-parts-itead-development-board/ <Fritzing Parts: ITEAD Development Board>] |
| − | [https://github.com/ | + | *[https://github.com/Waelson/iBoardRF24 '''iBoard + nRF24L01'''] by Waelson |
| + | :This is an iBoard library that helps starters to hack iBoard and learn more the usage of iBoard with Nrf24l01 through its examples. | ||
| − | [http:// | + | *[http://blog.mrossi.com/2013/10/arduino-pulse-counting-with-multiple.html Arduino pulse counting with multiple Energy Meters and logging to Emoncms] |
| − | [http://blog. | + | *[http://blog.mrossi.com/2013/07/arduino-relay-board-to-drive-two-flood.html Arduino Relay Board to drive two flood pumps] |
| − | [http:// | + | *[http://www.thingiverse.com/thing:483676 MySensors Ethernet Gateway Box for iBoard v2.0] - This is a box for the MySensors ethernet gateway designed for an iBoard. This version includes radio LEDs and an inclusion button, and stronger pillars. |
Latest revision as of 06:21, 10 March 2017
Contents
Overview
Iboard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, nRF24L01+ module interface and an ATMega328. This board will add wireless XBee / nRF24L01+ control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!
Iboard can be used as an Ethernet, wireless communication project development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.
The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE.
The onboard POE is pseudo POE, because the pin 4, 5, 7, 8 in 100M network cable is not being used. So we only use POE to power Ibaord. If you want to use the network cable to power, you can buy injector here. Or you can use DC7-23V to power.
Go shopping IBoard (SKU:IM120410001)
Spec
| PCB size | 79.2mm X 53.8mm X 1.6mm |
| Power supply | 6-23V DC |
| Microprocessor | Atmega328 |
| Indicators | PWR, Tx, Rx, COL, FDX, SPD, LINK |
| RoHS | Yes |
Electrical Characteristics
| Specification | Min. | Typical Value | Max. | Unit |
|---|---|---|---|---|
| Power Voltage | 6 | - | 23 | VDC |
| Input Voltage VH (Target Voltage = 3.3V) | 3 | 3.3 | 3.6 | V |
| Input Voltage VL: | -0.3 | 0 | 0.5 | V |
| Current Consumption | - | 100 | 500 | mA |
Hardware
Top View Map
Iboard can be used as an Ethernet, wireless communication project development platform. Iboard support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping.
The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB, power Jack or POE.
Software
Iboard is designed for compatible for SD and Wiznet libraries of Arduino, and all demo codes could be downloaded directly here: http://www.ladyada.net/learn/arduino/ethfiles.html
With embedded bootloader, Iboard is easy to use by Arduino IDE through Foca series. ISP of Atmega328 is broke out for download firmware easily.
Download
Useful Link
- iBoard + nRF24L01 by Waelson
- This is an iBoard library that helps starters to hack iBoard and learn more the usage of iBoard with Nrf24l01 through its examples.
- MySensors Ethernet Gateway Box for iBoard v2.0 - This is a box for the MySensors ethernet gateway designed for an iBoard. This version includes radio LEDs and an inclusion button, and stronger pillars.
